linux应用程序存放目录,linux 存储多路径软件

# This is a basic configuration file with some examples, for device mapper

# multipath.

# For a complete list of the default configuration values, see

# /usr/share/doc/device-mapper-multipath-0.4.9/multipath.conf.defaults

# For a list of configuration options with descriptions, see

# /usr/share/doc/device-mapper-multipath-0.4.9/multipath.conf.annotated

#

# REMEMBER: After updating multipath.conf, you must run

#

# service multipathd reload

#

# for the changes to take effect in multipathd

## By default, devices with vendor = "IBM" and product = "S/390.*" are

## blacklisted. To enable mulitpathing on these devies, uncomment the

## following lines.

#blacklist_exceptions {

# device {

# vendor "IBM"

# product "S/390.*"

# }

#}

## Use user friendly names, instead of using WWIDs as names.

defaults {

user_friendly_names yes

}

##

## Here is an example of how to configure some standard options.

##

#

#defaults {

# udev_dir /dev

# polling_interval 10

# path_selector "round-robin 0"

# path_grouping_policy multibus

# getuid_callout "/lib/udev/scsi_id --whitelisted --device=/dev/%n"

# prio alua

# path_checker readsector0

# rr_min_io 100

# max_fds 8192

# rr_weight priorities

# failback immediate

# no_path_retry fail

# user_friendly_names yes

#}

##

## The wwid line in the following blacklist section is shown as an example

## of how to blacklist devices by wwid. The 2 devnode lines are the

## compiled in default blacklist. If you want to blacklist entire types

## of devices, such as all scsi devices, you should use a devnode line.

## However, if you want to blacklist specific devices, you should use

## a wwid line. Since there is no guarantee that a specific device will

## not change names on reboot (from /dev/sda to /dev/sdb for example)

## devnode lines are not recommended for blacklisting specific devices.

##

#blacklist {

# wwid 26353900f02796769

# devnode "^(ram|raw|loop|fd|md|dm-|sr|scd|st)[0-9]*"

# devnode "^hd[a-z]"

#}

blacklist {

devnode "^(ram|raw|loop|fd|md|dm-|sr|scd|st)[0-9]*"

devnode "^hd[a-z]"

devnode "^cciss!c[0-9]d[0-9]*"

}

#multipaths {

# multipath {

# wwid 3600508b4000156d700012000000b0000

# alias yellow

# path_grouping_policy multibus

# path_checker readsector0

# path_selector "round-robin 0"

# failback manual

# rr_weight priorities

# no_path_retry 5

# }

# multipath {

# wwid 1DEC_____321816758474

# alias red

# }

#}

devices {

# device {

# vendor "COMPAQ "

# product "HSV110 (C)COMPAQ"

# path_grouping_policy multibus

# getuid_callout "/lib/udev/scsi_id --whitelisted --device=/dev/%n"

# path_checker readsector0

# path_selector "round-robin 0"

# hardware_handler "0"

# failback 15

# rr_weight priorities

# no_path_retry queue

# }

# device {

# vendor "COMPAQ "

# product "MSA1000 "

# path_grouping_policy multibus

# }

# Device attributed for EMC CLARiiON and VNX series ALUA

device {

vendor "DGC"

product "*"

prio_callout "/sbin/mpath_prio_alua /dev/%n"

path_grouping_policy group_by_prio

features "1 queue_if_no_path"

failback immediate

hardware_handler "1 alua"

}

}