hpux服务器修改ip地址,如何修改HPUX MP管理口IP地址？

我已经处理好了，之前是因为串口驱动异常导致。

我用网线直连笔记本和MP口(MP口默认地址：192.168.0.1，不知道MP口的，可以直接重置MP口)。

我的操作如下：

MP login: Admin

MP password:(Admin)

(c)Copyright 2000-2008 Hewlett-Packard Co.,  All Rights Reserved.

Welcome to

rx8640\'s Management Processor

MP MAIN MENU:

CO: Consoles

VFP: Virtual Front Panel

CM: Command Menu

CL: Console Logs

SL: Show Logs

FW: Firmware Update

HE: Help

X: Exit Connection

[mp00265510ee8a] MP> CM

Enter HE to get a list of available commands

(Use ^B to return to main menu.)

[mp00265510ee8a] MP:CM> LS

Current configuration of MP customer LAN interface

MAC address   : 00:26:55:10:ee:8a

DHCP Status   : Enabled

IP address    : 0.0.0.0         0x00000000

Hostname      : mp00265510ee8a

Subnet mask   : 0.0.0.0         0x00000000

Gateway       : 0.0.0.0         0x00000000

Status        : UP and RUNNING

Link          : Connected 10Mb Half Duplex

Current configuration of Integrity Lights Out Advanced KVM card LAN interface

No Integrity Lights Out Advanced KVM Cards were found

[mp00265510ee8a] MP:CM>lc

MP Configurable LAN devices:

1 - MP Customer LAN

Enter LAN device to change, or [Q] to Quit: 1

Current configuration of MP customer LAN interface

MAC address   : 00:26:55:10:ee:8a

DHCP Status   : Enabled

IP address    : 0.0.0.0         0x00000000

Hostname      : mp00265510ee8a

Subnet mask   : 0.0.0.0         0x00000000

Gateway       : 0.0.0.0         0x00000000

Status        : UP and RUNNING

Link          : Connected 10Mb Half Duplex

Do you want to modify the configuration for the MP LAN? (Y/[N])    y

Current DHCP Status is: Enabled

Do you want to modify it? (Y/[N])        y

Toggle DHCP State? (Y/[N])       y

New DHCP Status will be: Disabled

Please confirm (Y/[N])     y

-> DHCP Status will be updated.

Static IP Address is: 192.168.1.1

Do you want to modify it? (Y/[N])    y

Enter new IP Address :   172.96.28.3

New IP Address will be:   172.96.28.3

Please confirm (Y/[N])      y

-> IP Address will be updated.

Current MP Network Name is: mp00265510ee8a

Do you want to modify it? (Y/[N])      n

Static Subnet Mask is: 255.255.255.0

Do you want to modify it? (Y/[N])      n

Static Gateway is: 192.168.1.1

Do you want to modify it? (Y/[N]) (Default will be IP address.)     y

Enter new Gateway : 172.96.28.254

New Gateway will be: 172.96.28.254

Please confirm (Y/[N]) y

-> Gateway will be updated.

Current Data Rate is: Auto Negotiate

Do you want to modify it? (Y/[N])

遗失对主机的连接。

重新配置主机的地址，和MP同网段即可telnet  连上。