android tablet gps antenna,gps - DGPS corrections on Android - Stack Overflow

Generally speaking DGPS is a technique that improves real position accuracy by canceling out most of the atmospheric effects on the GPS signal. In a typical direct GPS measurement there is about a random error in the ranges computed to the satellites due to atmospheric effects. This is why a GPS receiver that is left collecting data in a fixed location will seem to wander with in an error ellipse. For two receiver stations in the same area the atmospheric effects are almost identical and they will wander in parallel within their similarly sized and oriented error ellipses. If one of the two receivers is at a know location then the differences in their apparent GPS locations can be taken and plotted from the true location of the known station to find the true location of the unknown station.

Back in the day (circa 1992) when we had to accomplish DGPS by "post processing" we used to take the raw NEMA data collected at the two stations match up the times, compute the baseline vector and apply it to the known point to find the unknown point. I think the NEMA data we were using was only recorded to the nearest 10 sec. The math isn't really that hard.

I suspect that NEMA GPS messages [http://developer.android.com/reference/android/location/GpsStatus.NmeaListener.html ] from a tablet at a known point (with a clear sky view) could probably be sent over an internet socket to a smart phone (also with a clear sky view), which could then compute the difference and achieve a sub-meter relative location over a distance of few km, even if the assumed Internet transit times were ignored. This technique would probably still work even if the tablet and smart phone were both applying broadcast DGPS adjustments.