signature=629977fca2d87be184e13e2951f8a810,Rtheraol-uTgimh eHiTgrha-cFkrienqguoefnCcyO2MIenajescutre...

摘要：

CO2 was injected into a coal fire burning at a depth of 15 m in the subsurface in southwestern Colorado, USA. Measurements were made of the 13CO2 isotopic signature of gas exhaust from an observation well and two surface fissures. The goal of the test was to determine (1) whether CO2 with a distinct isotopic signature could be used as a tracer to identify flow pathways and travel times in a combustion setting where CO2 was present in significant quantities in the gases being emitted from the coalbed fire, and (2) to confirm the existence of a self-propagating system of air-intake and combustion gas exhaust that has been previously proposed. CO2 was injected in three separate periods. The 13CO2 isotopic signature was measured at high frequency (0.5 Hz) before, during, and after the injection periods for gas flowing from fissures over the fire and from gas entering an observation well drilled into the formation just above the fire but near the combustion zone. In two cases, a shift in the isotopic signature of outgassing CO2 provided clear evidence that injected CO2 had traveled from the injection well to the observation point, while in a third case, no response was seen and the fissure could not be assumed to have a flowpath connected with the injection well. High-frequency measurements of the 13CO2 signature of gas in observation wells is identified as a viable technique for tracking CO2 injected into subsurface formations in real-time. In addition, a chimney-like coupled air-intake and exhaust outlet system feeding the combustion of the coal seam was confirmed. This can be used to further develop strategies for extinguishing the fire.

展开