1、 设备模型
随着技术的不断进步,系统的拓扑结构也越来越复杂,对智能电源管理、热插拔的支持要求也越来越高,2.4内核已经难以满足这些需求。为适应这种形势的需要,Linux
2.6内核提供了全新的内核设备模型。
2、 设备模型元素
总线
驱动
设备
3、 总线
总线是处理器和设备之间的通道,在设备模型中, 所有的设备都通过总线相连, 甚至是内部的虚拟“platform”总线。 在 Linux
设备模型中, 总线由 bus_type 结构表示, 定
义在
4、 总线描述
struct bus_type {
const char *name;
struct bus_attribute *bus_attrs;
struct device_attribute *dev_attrs;
struct driver_attribute *drv_attrs;
int (*match)(struct device *dev, struct device_driver *drv);
int (*uevent)(struct device *dev, struct kobj_uevent_env
*env);
int (*probe)(struct device *dev);
int (*remove)(struct device *dev);
void (*shutdown)(struct device *dev);
int (*suspend)(struct device *dev, pm_message_t state);
int (*suspend_late)(struct device *dev, pm_message_t state);
int (*resume_early)(struct device *dev);
int (*resume)(struct device *dev);
struct dev_pm_ops *pm;
struct bus_type_private *p;
}
5、 总线注册/删除
1)总线的注册使用:bus_register(struct bus_type * bus)
若成功,新的总线将被添加进系统,并可在sysfs 的 /sys/bus 下看到。
2)总线的删除使用:void bus_unregister(struct bus_type *bus)
6、 总线方法
1)int (*match)(struct device * dev, struct device_driver *
drv)
当一个新设备或者驱动被添加到这个总线时,该方法被调用。用于判断指定的驱动程序是否能处理指定的设备。若可以,则返回非零值。
2)int (*uevent)(struct device *dev, char **envp, int num_envp, char
*buffer, int buffer_size)
在为用户空间产生热插拔事件之前,这个方法允许总线添加环境变量。
7、 总线属性
总线属性由结构bus_attribute 描述,定义如下:
struct bus_attribute
{
struct attribute
attr;
ssize_t (*show)(struct bus_type *, char * buf);
ssize_t (*store)(struct bus_type *, const char *
buf, size_t count);
}
1)int bus_create_file(struct bus_type *bus, struct bus_attribute
*attr)
创建属性
2)void bus_remove_file(struct bus_type *bus, struct bus_attribute
*attr)
删除属性
8、实例分析
Bus_basic.c源码
#include
#include
#include
#include
#include
MODULE_AUTHOR("yinjiabin");
MODULE_LICENSE("Dual BSD/GPL");
static char *Version = "$Revision: 1.0 $";
static int my_match(struct device
*dev, struct device_driver *driver)
{
return !strncmp(dev->kobj.name,
driver->name,
strlen(driver->name));
}
struct bus_type my_bus_type = {
.name = "my_bus", //总线名字
.match = my_match, //总线match函数指针
};
static ssize_t show_bus_version(struct bus_type *bus, char
*buf)
{
return snprintf(buf, PAGE_SIZE, "%s\n", Version);
}
static BUS_ATTR(version, S_IRUGO, show_bus_version, NULL);
static int __init my_bus_init(void)
{
int ret;
ret = bus_register(&my_bus_type);
if (ret)
return ret;
if (bus_create_file(&my_bus_type,
&bus_attr_version))
printk(KERN_NOTICE "Fail to create version attribute!\n");
return ret;
}
static void my_bus_exit(void)
{
bus_unregister(&my_bus_type);
}
module_init(my_bus_init);
module_exit(my_bus_exit);
9、 试验结果