在ShowManagers软件中，使用CTRL+ALT+F1组合键进入命令提示符，输入'unconfig'并用'dolby'作为密码启动卸载配置脚本。在不改变设置的情况下，可以随时按ESC退出。选择不卸载多厅和网络设置，但确认重置ShowStore参数到出厂默认。选择不删除所有内容，完成脚本后重新启动设备以应用新的设置。
Resetting Show Store Parameters
With a keyboard and mouse connected to the Show Store, in the Show Manager
software press CTRL+ALT+F1 to access the command prompt. Enter “unconfig” at
the login prompt and enter the password “dolby” (both without the “” marks). This
will start the unconfiguration script which is used for setting the Show Store back to
factory defaults.
Press ENTER to proceed with the unconfiguration, bearing in mind that you can press
ESC at any time to exit this script without making changes. Also note that this script
has the potential to erase all content and network settings from the Show Store, so
proceed with care.
When asked if you want to unconfigure the multi-auditorium and network settings,
select “No” and press ENTER.
When asked if you want to unconfigure the Show Manager server settings, select
“No” and press ENTER.
When asked if you want to reset the parameters on this Show Store to factory
defaults, select “Yes” and press ENTER.
Select “No” in order to avoid deleting all the content from the Show Store.
After you have finished with the script, you will be prompted to reboot the unit. The
new settings will be applied whenever the unit has finished booting.
扫一扫
560
被折叠的 条评论
为什么被折叠?
到【灌水乐园】发言
