元器件交易网http://www.wendangwang.com
DFLT5V0A - DFLT51A
225W SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR
PowerDIä123
Features
NEWPRODUCT
··············
225W Peak Pulse Power Dissipation (10ms x 1000mswaveform)
5.0V - 51V Standoff VoltagesExcellent Clamping Capability
Lead Free Finish, RoHS Compliant (Note 6)"Green" Molding Compound(No Br, Sb)
Qualified to AEC-Q101Standards for HighReliability
Mechanical Data
Case: PowerDIä
123
Case Material: Molded Plastic, "Green" MoldingCompound. ULFlammabilityClassification Rating94V-0
Moisture Sensitivity: Level 1 per J-STD-020CTerminal Connections: Cathode Band
Terminals: Finish¾Matte Tin annealed over Copperleadframe.Solderableper MIL-STD-202,Method 208e3
Marking & Type Code Information: See Last PageOrdering Information: See Last PageWeight: 0.01 grams (approximate)
@ TA= 25°C unless otherwise specified
Maximum Ratings
Thermal Characteristics
@ TA= 25°C unless otherwise specified
Notes: 1. Non-Repetitive current pulse as shown in figure 3 and derated above TA= 25°C as per figure 1.
2. Non-Repetitive current pulse as shown in figure 5 and derated above TA= 25°C as per figure 1.
3. Device mounted on 1"x1", FR-4 PCB; 2 oz. Cu pad layout as shown on Diodes Inc. suggested pad layout document AP02001.pdf.4. Theoretical RqJScalculated from the top center of the die straight down to the PCB/cathode tab solder junction.5. 1/2 sine wave (or equivalent square wave), pulse width = 8.3ms, duty cycle = 4 pulses/minute maximum.
6.RoHS revision 13.2.2003. Glass and High Temperature Solder Exemptions Applied, seeEU Directive Annex Notes 5 and 7
.