linux wifi模块编程,Linux 增加Zydas WiFi模块

根据firmware的说明，将其中的zd1211b_*文件拷贝到根文件系统/lib/firmware/zd1211目录中。

在开发板上执行：

mkdir -p /lib/firmware/zd1211/

cp zd1211_* /lib/firmware/zd1211/

再次执行 Ifconfig wlan0

有如下提示

[root@FriendlyARM zd1211-firmware]# ifconfig wlan0 up

usb 1-1: firmware: requesting zd1211/zd1211b_ub

usb 1-1: firmware: requesting zd1211/zd1211b_uphr

zd1211rw 1-1:1.0: firmware version 4725

zd1211rw 1-1:1.0: zd1211b chip 0ace:1215 v4810 full 00-e0-4c UW2453_RF pa0 g7---

cfg80211: Calling CRDA for country: US

运行ifconfig 的结果

[root@FriendlyARM zd1211-firmware]# ifconfig

eth0      Link encap:Ethernet  HWaddr 08:00:3E:26:0A:5B

inet addr:192.168.1.230  Bcast:192.168.1.255  Mask:255.255.255.0

UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1

RX packets:505 errors:0 dropped:0 overruns:0 frame:0

TX packets:233 errors:0 dropped:0 overruns:0 carrier:0

collisions:12 txqueuelen:1000

RX bytes:218025 (212.9 KiB)  TX bytes:31950 (31.2 KiB)

Interrupt:53 Base address:0x300

lo        Link encap:Local Loopback

inet addr:127.0.0.1  Mask:255.0.0.0

UP LOOPBACK RUNNING  MTU:16436  Metric:1

RX packets:0 errors:0 dropped:0 overruns:0 frame:0

TX packets:0 errors:0 dropped:0 overruns:0 carrier:0

collisions:0 txqueuelen:0

RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

wlan0     Link encap:Ethernet  HWaddr 00:E0:4C:18:74:B5

UP BROADCAST MULTICAST  MTU:1500  Metric:1

RX packets:0 errors:0 dropped:0 overruns:0 frame:0

TX packets:0 errors:0 dropped:0 overruns:0 carrier:0

collisions:0 txqueuelen:1000

RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

wmaster0  Link encap:UNSPEC  HWaddr 00-E0-4C-18-74-B5-00-00-00-00-00-00-00-00-00-00

UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1

RX packets:0 errors:0 dropped:0 overruns:0 frame:0

TX packets:0 errors:0 dropped:0 overruns:0 carrier:0

collisions:0 txqueuelen:1000

RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)