用户在VMWare工作站上运行Kali-Rolling 2016.1，并安装了compat-wireless-2.6。尽管系统显示了wlan0和wlan1作为托管，但无法使WiFi正常工作。尝试使用ifconfig wlan0 up命令后，接口状态仍保持DOWN。可能的问题涉及无线网卡驱动或配置。
我在VMWare工作站上运行Kali-Rolling(2016.1)。
安装了compat-wireless-2.6，现在它也将wlan0(卡)和wlan1(USB)显示为托管，但是我找不到使WiFi正常工作的方法。
ip link show wlan0
wlan0: mtu 1500 qdisc mq state DOWN mode
DORMANT group default qlen 1000
After ifconfig wlan0 up state is still DOWN.
$ sudo ifconfig -a
hwsim0 Link encap:UNSPEC HWaddr 12-00-00-00-00-00-3A-32-00-00-00-00-00-00-00-00
BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:65536 Metric:1
RX packets:28 errors:0 dropped:0 overruns:0 frame:0
TX packets:28 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:1680 (1.6 KiB) TX bytes:1680 (1.6 KiB)
wlan0 Link encap:Ethernet HWaddr 02:00:00:00:00:00
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
wlan1 Link encap:Ethernet HWaddr 02:00:00:00:01:00
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
3361
被折叠的 条评论
为什么被折叠?
到【灌水乐园】发言
