html细实线英文,细实线是什么意思

本文探讨了细实线在工程绘图中的正确应用,包括与轴线的关系、非圆投影视图中的齿线表示、基准代号的绘制以及装配算法中的轮廓识别。重点讲解了图线规格、细实线与其他线型的区别,并介绍了如何处理斜齿轮和人字齿轮的齿形。此外,还涉及了基于零件生成的装配算法,以及对不同线型如粗实线、虚线的处理方法。

摘要生成于 C知道 ,由 DeepSeek-R1 满血版支持, 前往体验 >

1. 为细实线,不可与轴线重合或注在其他线的延长处。

Coincident with any existing lines or drawn as extension of any lines.

2. 解决排图后中心线、虚线、双点划线像细实线的问题。

Solution after row of chart center line, dotted line, double -dotted lines as thin solid line.

3. 为细实线,应从轮廓线、轴线或对称中心线处引出。

Line originates from a feature outline, an axis line, or a center line.

4. 对于斜齿轮和人字齿轮,可在非圆投影的视图上用三条平行的细实线表示齿线方向

With regard to helical gear and herringbone wheel, teeth are represented with three thin, parallel lines in the noncircular view.

5. 基准代号由带小圆的大写字母用细实线与粗短线相连所组成。

The reference code is made up of the capital letter with a small circle connected by fine lines and short thick lines.

6. \u0039\u0031\u0031\u67E5\u8BE2\u00B7\u82F1\u8BED\u5355\u8BCD

6. 实现了以零件生成为前提、集合运算和轮廓识别为基本手段的装配算法,其中包括定位问题的处理,装配关系的提取,以及轮廓线、细实线、点划线、剖面线的综合处理方法。

A new contour recognition algorithm is put forward. On the basis of single part generation, Boolean operation, and contour recognition, the assembly algorithm is accomplished.

7. 比如标准中规定的图线就有8种规格,即粗实线、细实线、虚线、点划线等。

For example the standard set forth in Chart there are eight kinds of specifications, namely, thick solid line, thin solid line, dashed line, dash and other points.

8. \u0064\u0061\u006E\u0063\u0069\u002E\u0039\u0031\u0031\u0063\u0068\u0061\u002E\u0063\u006F\u006D

8. 图2 西部地区温度重建序列多元回归法重建序列;面积加权法重建序列细实线为重建曲线,粗实线为30 年高斯滤波结果,灰色

Fig12 Surface temperature reconstruction in western China1Curve is obtained by the method of multiple linear regressions, and curve u2

9. 在圆形视图中—小径D1画粗实线;大径D只画3/4圈细实线;不画倒角圆。

In the axial view—The minor diameter D1 is drawn in thick lines; Only

10. 先粗后细:先加深全部粗实线,再加深全部虚线、点画线及细实线等。

First thick lines and then thin lines: One should first draw continuous thick lines

11. 细实线的意思

11. 齿顶线画粗实线、齿根线画细实线,啮合区不画齿顶线和齿根线。

The addendum circle is shown in thick lines, and the dedendum circle in thin ones.

12. 小径d1画细实线表示螺纹牙底,在圆形的视图中只画3/4圈。

Minor diameter d1—Draw thread`s root in thin lines, but only a circle is drawn in the axial view.

评论
添加红包

请填写红包祝福语或标题

红包个数最小为10个

红包金额最低5元

当前余额3.43前往充值 >
需支付:10.00
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值