本文主要讲一下在Linux下用打包C扩展程序.so文件和Windows下的不同,详细的代码和配置方案请参加另一篇博客:http://blog.csdn.net/maverick1990/article/details/46519045
步骤:
1.安装php环境到目录 /usr/local/php/ 目录下
2.下载相同版本的php源码包,安装到 /root/php-5.6.9/ 目录下,可到官网http://www.php.net/downloads.php下载
执行命令:cd /root
wget http://us1.php.net/distributions/php-5.6.9.tar.bz2
tar -xf php-5.6.9.tar.bz2注意,有一些历史版本没有源码包,需要升级php到提供源码包的版本
3.到 /php-5.6.9/ext/ 目录下,使用ext_skel生成扩展骨架cd ./php-5.6.9/ext
./ext_skel --extname=test
4.修改配置文件 /test/config.m4
取消下面两行的dnl注释:PHP_ARG_ENABLE(test, whether to enable test support,
dnl Make sure that the comment is aligned:
[ --enable-test Enable test support])
如果要使用C++进行编译,要将test.c改名为test.cpp,并在config.m4中添加
PHP_REQUIRE_CXX()
PHP_ADD_LIBRARY(stdc++, 1, EXTRA_LDFLAGS)
PHP_NEW_EXTENSION(test, test.cpp, $ext_shared)
5.在php_test.h文件中添加代码,加入自定义的函数声明:
PHP_MINIT_FUNCTION(test);
PHP_MSHUTDOWN_FUNCTION(test);
PHP_RINIT_FUNCTION(test);
PHP_RSHUTDOWN_FUNCTION(test);
PHP_MINFO_FUNCTION(test);
PHP_FUNCTION(confirm_test_compiled);/* For testing, remove later. */
PHP_FUNCTION(testFunc);
6.在test.c/cpp中添加自定义函数代码:
(1)首先,在这个位置引入用到的头文件:#ifdef HAVE_CONFIG_H
#include "config.h"
#endif
#include #include #include#include "php.h"
#include "php_ini.h"
#include "ext/standard/info.h"
#include "php_test.h"否则,会出现很多函数重定义的问题,详见另一篇博客:http://blog.csdn.net/maverick1990/article/details/46786685
(2)然后,在这个位置添加函数入口:const zend_function_entry test_functions[] = {
PHP_FE(confirm_test_compiled, NULL)/* For testing, remove later. */
PHP_FE(testFunc, NULL)
PHP_FE_END/* Must be the last line in test_functions[] */
};
(3)最后,在文件尾部添加testFunc函数的代码,也可以在这里定义其他自定义函数
PHP_FUNCTION(testFunc)
{
char *x = NULL;
char *y = NULL;
int argc = ZEND_NUM_ARGS();
int x_len;
int y_len;
if (zend_parse_parameters(argc TSRMLS_CC, "ss", &x, &x_len, &y, &y_len) == FAILURE)
return;
int result_length = x_len + y_len;
char* result = (char *) emalloc(result_length + 1);
strcpy(result, x);
strcat(result, y);
RETURN_STRINGL(result, result_length, 0);
}
关于PHP_FUNCTION函数的书写方法,详见博客:http://weizhifeng.net/write-php-extension-part2-1.html
7.在 /root/php-5.6.9/ext/test/ 目录下,建立php扩展模块:phpize可能需要加上路径:
/usr/local/php/bin/phpize
8.回到 /root/php-5.6.9/ 目录,重新建立编译需要的配置:cd ../..
./buildconf --force
若出现类似的报错:buildconf: You need autoconf 2.59 or lower to build this version of PHP.
You are currently trying to use 2.63
Most distros have separate autoconf 2.13 or 2.59 packages.
On Debian/Ubuntu both autoconf2.13 and autoconf2.59 packages exist.
Install autoconf2.13 and set the PHP_AUTOCONF env var to
autoconf2.13 and try again.
那么,通过下面的方法解决:
yum install autoconf213
export PHP_AUTOC/bin/autoconf-2.139.再到 /root/php-5.6.9/ext/test/ 目录下,生成配置:./configure --with-php-c/local/php/bin/php-config
10.编译并生成.so扩展文件make
make install若make出错,修改代码直到编译通过
若make install出错,修改后,需要清空当前生成的扩展模块:phpize --clean
然后从第7步重新开始
11.查看test.so是否生成
make install成功后会给出生成路径,例如:/usr/local/php/lib/php/extensions/no-debug-non-zts-20131226/test.so
12.修改php.ini
修改 /usr/local/php/etc/php.ini 文件,加入扩展路径和名称:extension_dir = "/usr/local/php/lib/php/extensions/no-debug-non-zts-20131226/"
extension = "teste.so"
13.重启PHP服务service php-fpm restart
14.在PHP中使用C++扩展函数
注意:若使用扩展函数时出现错误:
PHP Warning PHP Startup Unable to initialize module
Module compiled with module API=20121212 PHP
compiled with module API=20090626
These options need to match in Unknown on line 0
这是由于编译.so文件的php源码包版本和当前使用的php版本不同所致,需要在下载当前版本的php源码包,重新编译扩展
版权声明:本文为博主原创文章,未经博主允许不得转载。
以上就介绍了在Linux下用C扩展PHP(打包成so)的方法,包括了方面的内容,希望对PHP教程有兴趣的朋友有所帮助。
本文原创发布php中文网,转载请注明出处,感谢您的尊重!
相关文章
相关视频