matlab仿真参数如何设置,simulink仿真参数设定（Simulink simulation parameter setting）.doc...

淡庸

于 2021-03-18 13:23:20 发布

阅读量2.6k

点赞数

文章标签： matlab仿真参数如何设置

在构建系统模型后，接下来就是运行模型获取仿真结果。完成一次仿真运行分为三个步骤：设置仿真参数、仿真分析及查看仿真结果。重点介绍了设置仿真参数的Solver页面，包括设置起止时间、选择求解器及其参数、输出选项等。此外，还提到了工作区输入输出管理和诊断页面的警告消息选择。

摘要由CSDN通过智能技术生成

simulink仿真参数设定(Simulink simulation parameter setting)

2007-05-11 21:12 (| classification: default classification)

After building a model of the system, the next thing is to run the model, the simulation results are obtained. Complete the process of running a simulation is divided into three steps: setting simulation parameters, simulation analysis and simulation results start.

First, setting simulation parameters and selection of solver

Set the simulation parameters and the choice of solver, select the Simulation menu under the Parameters command will pop up a dialog box that the main simulation parameters, parameters of three pages Management simulation.

The Solver page, it allows the user to set the start and end time, choice of solver, solver parameters and choose some output options.

Workspace I/O page is input management model from