单片机旋转led程序c语言,基于单片机POV的旋转LED灯程序

/**************************************************************************************

*Name:旋转LED

*Version:1.0

*Date:

*BY:C

***************************************************************************************/

#include                             //此文件中定义了单片机的一些特殊功能寄存器

typedef unsigned int uint;           //对数据类型进行声明定义

typedef unsigned char uchar;

sbit HR_Sensor  = P3^2;   //霍尔传感器

sbit Beep = P2^0;         //蜂鸣器

sbit Key_Wake = P2^1;     //唤醒按键

sbit Led_H = P0;          //所有Led正极接一起接VCC

sbit Led_L = P1;

uchar Select = 0;

//阳码

uchar code ASCII0[32] = {0xFE,0xFF,0xFE,0xFF,0xFE,0xFF,0xFE,0xFF,0x00,0x00,0xFE,0xFD,0xFE,0x7B,0xFA,

0xB7,0xF6,0xDF,0xEE,0xEF,0xDE,0xF7,0xBE,0xFB,0xFE,0xFB,0xFE,0xFD,0xFE,0xFD,

0xFF,0xFF};   //“长”

uchar code ASCII1[32] = {0xFD,0xDF,0xDD,0xDF,0xD5,0xBF,0xD5,0x7F,0xD4,0x80,0xD5,0xB6,0xD1,0xB6,0x05,

0xB6,0xD5,0xB6,0xD5,0xB6,0xD4,0x80,0xD5,0x7F,0xD5,0xBF,0xDD,0xDF,0xFD,0xDF,

0xFF,0xFF};    // “春”

uchar code ASCII2[32] = {0xDF,0xFB,0xDE,0xF9,0xDE,0xFB,0xC0,0x07,0xDE,0xF7,0xDE,0xF7,0xFF,0xFD,0x80,

0xDD,0xB6,0xDD