android6.0串口配置,[RK3288][Android6.0] 調試筆記 --- 普通串口的添加 【轉】

版權聲明：本文為博主原創文章，未經博主允許不得轉載。

Platform: ROCKCHIP

OS: Android 6.0

Kernel: 3.10.92

uart0,1,3,4 (普通串口) 用的是同一個串口驅動.

uart2(調試串口)的驅動代碼嵌在fiq debugger的code中.

相關的配置在rk3288.dtsi中:

aliases {

serial0 = &uart_bt;

serial1 = &uart_bb;

serial2 = &uart_dbg;

serial3 = &uart_gps;

serial4 = &uart_exp;

......

}

uart_bb: serial@ff190000 {

compatible = "rockchip,serial";

reg = <0xff190000 0x100>;

interrupts = ;

clock-frequency = <24000000>;

clocks = , ;

clock-names = "sclk_uart", "pclk_uart";

reg-shift = <2>;

reg-io-width = <4>;

dmas = , ;

#dma-cells = <2>;

pinctrl-names = "default";

pinctrl-0 = ;

status = "disabled";

};

假設這里要使用uart1,也就是uart_bb, 那么只要在主dts中添加:

&uart_bb {

status = "okay";

dma-names = "!tx", "!rx";

};

另外,由於uart1默認作為base band通信用,所以在.rc修改成你需要的權限

diff --git a/init.connectivity.rc b/init.connectivity.rc

index 71d125a..1e06417 100755

--- a/init.connectivity.rc

+++ b/init.connectivity.rc

@@ -54,10 +54,8 @@ on boot

# bluetooth power up/down interface

chmod 0660 /dev/ttyS0

-    chmod 0660 /dev/ttyS1

chmod 0660 /dev/vflash

chown bluetooth net_bt_stack /dev/vflash

-    chown bluetooth net_bt_stack /dev/ttyS1

chown bluetooth net_bt_stack /dev/ttyS0

chown bluetooth net_bt_stack /sys/class/rfkill/rfkill0/type

chown bluetooth net_bt_stack /sys/class/rfkill/rfkill0/state

diff --git a/ueventd.rockchip.rc b/ueventd.rockchip.rc

index b7f45c2..c6d773a 100644

--- a/ueventd.rockchip.rc

+++ b/ueventd.rockchip.rc

@@ -31,6 +31,9 @@

/dev/mirroring            0664   media      media

/dev/iep                  0660   media      media

+#Kris

+/dev/ttyS1                0666   system     system

+

# for Sensor HAL

/dev/akm8973              0660   system     system

/dev/accelerometer        0660   system     system

測試:

可以弄兩塊板子, 然后將兩個一樣的串口連接起來,一塊收一塊發

1.

# cat /dev/ttyS1

2.

# echo test > /dev/ttyS1