linux汇编读取文件操作,linux中支持大文件读写

Large File Support in Linux

To support files larger than 2 GiB on 32-bit systems, e.g. x86,

PowerPC and MIPS, a number of changes to kernel and C library had to

be done. This is called Large File Support (LFS). The support for

LFS should be complete now in Linux and this article should give a

short overview of the current status.

64 bit systems like Alpha, IA64 and x86-64 don't have problems

with large files but do support the new interfaces also. In this case

the new interface is mainly an alias to the normal interface.

The LFS support is done by the Linux kernel and the GNU C library

(aka glibc).

Limits

LFS raises the limit of maximal file size. For 32-bit systems the

limit is 231 (2 GiB) but using the LFS interface on filesystems that

support LFS applications can handle files as large as 263 bytes.

For 64-bit systems the file size limit is 263 bytes unless a

filesystem (like NFSv2) only supports less.

LFS in Glibc 2.1.3 and Glibc 2.2

The LFS interface in glibc 2.1.3 is complete - but the implementation

not. The implementation in 2.1.3 contains also some bugs,

e.g. ftello64 is broken. If you want to use the LFS interface, you

need to use a glibc that has been compiled against headers from a

kernel with LFS support in it.

Since glibc 2.1.3 was released before LFS support went into Linux

2.3.X/2.4.0-testX, some fixes had to be made to glibc to support the

kernel routines. The current stable release of glibc is glibc 2.2.3

(2.2 was released in November 2000) and it does support all the features from

Linux 2.4.0. Glibc 2.2.x is now used by most of the major distributions

in their latest release (e.g. SuSE 7.2, Red Hat 7.1).

glibc 2.2

supports the following features that glibc 2.1.3 doesn't support:

getdents64 system call

64 bit file locking interface (see below for details)

Programs compiled against glibc 2.1.3 will work on a LFS system,

there's no need to recompile the programs (with the exception of the

64 bit fcntl locking). Only glibc needs to be updated to support LFS.

Note that glibc 2.0 and libc5 do not support LFS at all.

Locking on Large Files is Not Supported withfcntl/lockfin Glibc 2.1.x

Locking via fcntl/lockf doesn't work with large files in

glibc 2.1.3. The support has been added in Linux 2.4.0-test7 to the

kernel and needed incompatible changes to glibc, only glibc 2.2 does handle

them. This means:

You can't use the flags F_GETLK64, F_SETLK64

and F_SETLKW64 with fcntl when you use glibc 2.1.x.

If your programs use them now, they fail. They also need to be

recompiled with glibc 2.2 which will support these fcntl

flags.

lockf64 only works on files < 2 GiB with glibc 2.1.x,

it does work with glibc 2.2 and no recompilation is needed.

LFS in the Linux Kernel

Since Linux 2.4.0-test7 most of the kernel interface is included

into the kernel. The open problems and restrictions are described

below.

File Systems

We can separate two levels of LFS compliance in the file systems:

Full support for files > 2 GiB and O_LARGEFILE

Limited LFS support: it gives proper EINVAL/EFBIG/EOVERFLOW error messages when

you try to use O_LARGEFILE or positions > 2 GiB.

At least the second level should be generally reachable, but is

some work to audit all the weird file systems.

Some bugs in NFSv2 regarding (2) have been fixed already, but some

are missing (like the O_LARGEFILE check). Other file systems probably

miss it too. A complete audit of all file systems is needed (see also

the 2.4 kernel TODO page at ).

The situation about the different filesystems used in Linux

2.4.0 and later can be summarized as follows:

ext2/ext3Full support for LFSNFSv2Cannot handle LFS due to protocol restrictions

(limited to 2 GiB - 1); limited LFS support but expect some bugsNFSv3The protocol is ok, but I'm not sure about the

Linux implementation statusReiserFS 3.5.x (not part of the kernel, separate patch)Does not support LFSReiserFS 3.6.x (part of kernel 2.4.1 and newer)Full support for LFS if the new on disk format is used. This

format is incompatible to the format used by 3.5.x (see below for some

more details).codaDoes not work with LFS (local cache issues, protocol is

ok)UFSFull support for LFS (although not complete

vs. O_LARGEFILE flag use)minixlimited to 2 GiB - 1 (file size is limited to 65804 MiB

but note that filesystem size is limited to 64 MiB - but holes are allowed)SysV (aka SCO)limited to 2 GiB -1msdoslimited to 2 GiB - 1umsdosbased on msdos, limited to 2 GiB - 1smbfsOlder protocols are limited to 4 GiB - 1. SMB extensions allow 64 bit

filesystems. Linux smbfs implementation is currently limited to 2 GiB - 1.NCPfsprotocol is limited to 4 GiB - 1, Linux implementation

to 2 GiB - 1JFSXFSShould work with LFS (for details about XFS see )other file systemsI don't have any information yet, feel free

to send me updates.

Note for ext2

When files > 2 GiB are created in ext2 older kernels will mount

file systems only read-only (it sets a read-only compatibility

flag).

Note for ReiserFS

Chris Mason wrote:

Disks formatted with the current 2.2 code are called our 3.5 disk format.

They will not support large files under any kernel (even the 2.4 code).

But, you can mount a 3.5 disk format under the 2.4 kernel code, and

use -o conv. This will turn on large file support for the

old disks, but only new files will be allowed to grow past 2 GiB.

Once you mount with -o conv, you can't mount under 2.2

any more. We are testing a back port of the LFS disk format to 2.2,

it should be ready soon. It has the same -o conv mount

option that our

2.4 code has, so all the same rules will apply.

rlimit64 Is Not Supported

The Linux kernel doesn't support a 64bit rlimit system call

yet, glibc supports getrlimit64 and setrlimit64 but

wraps too large values to RLIMIT_INFINITY.

Using LFS

For using LFS in user programs, the programs have to use the LFS API.

This involves recompilation and changes of programs. The API is

documented in the glibc manual (the libc info pages) which can be read

with e.g. "info libc".

In a nutshell for using LFS you can choose either of the following:

Compile your programs with "gcc -D_FILE_OFFSET_BITS=64". This forces all file access calls to use

the 64 bit variants. Several types change also, e.g. off_t

becomes off64_t. It's therefore important to always use the

correct types and to not use

e.g. int instead of off_t.

For portability with other platforms you should use

getconf LFS_CFLAGS which will return

-D_FILE_OFFSET_BITS=64 on Linux platforms but might return

something else on e.g. Solaris. For linking, you should use the link

flags that are reported via getconf LFS_LDFLAGS. On Linux

systems, you do not need special link flags.

Define _LARGEFILE_SOURCE and

_LARGEFILE64_SOURCE. With these defines you can use the LFS

functions like open64 directly.

Use the O_LARGEFILE flag with open to operate

on large files.

A complete documentation of the feature test macros like

_FILE_OFFSET_BITS and _LARGEFILE_SOURCE is in the

glibc manual (run e.g. "info libc 'Feature Test Macros'").

The LFS API is also documented in the LFS standard which is available

at .

LFS and Libraries other than Glibc

Be careful when using _FILE_OFFSET_BITS=64 to compile a

program that calls a library or a library if any of the interfaces

uses off_t. With _FILE_OFFSET_BITS=64 glibc will

change the type of off_t to off64_t. You can either

change the interface to always use off64_t, use a different

function if _FILE_OFFSET_BITS=64 is used (like glibc does).

Otherwise take care that both library and program have the same

_FILE_OFFSET_BITS setting. Note that glibc is aware of the

_FILE_OFFSET_BITS setting, there's no problem with it but

there might be problems with other libraries.

Distributions with LFS Support

SuSE 7.0

Release 7.0 of SuSE Linux supports LFS on all supported platforms.

The kernel of SuSE 7.0 is based on Linux 2.2.16.

The LFS support in the SuSE Linux kernel is the same as in the

development kernel 2.4.0-test1 for the file systems which are in both

kernels, glibc supports all the features of the kernel. The different

filesystems are ReiserFS (so far only in SuSE, the 2.2 port doesn't

support LFS) and NFSv3 (not available in SuSE 7.0). This means that

you need to use ext2 as file system for LFS.

Both Linux 2.4.0-test1 and SuSE 7.0 do not support the

getdents64 system call and the 64 bit locking interface.

These are only implemented in Linux 2.4.0-test8 and newer.

SuSE 7.1

Release 7.1 of SuSE Linux supports LFS on all supported platforms.

SuSE 7.1 comes with kernels based on 2.4.0 and 2.2.18.

The 2.2.18 kernel support LFS with the ext2 file system. The 2.4.0

kernel supports LFS with the ext2 and NFSv3 filesystems and

additionally with the ReiserFS filesystem if the new ReiserFS format

(incompatible to the 2.2 format) is used instead of the default 2.2

format.

SuSE 7.1 comes with glibc 2.2 that supports the full LFS interface.

But the 2.2.18 kernel only does not support the 64-bit filelocking and

the getdents64 calls.

SuSE 7.2 and newer

The kernel support for LFS is like the one in 7.1.

Other Distributions

Since I can't verify each and every distribution, I have to trust

others for the following information.

Debian

The current stable release (Debian 3.0, codename "woody") has LFS

support.

Red Hat

The beta called Fisher was the first to have LFS support (thanks

to Russ Marshall). Current Red Hat releases like Red Hat 8 have LFS support.

Tim Small send the following special

combo-gotcha for Red Hat 6.2 (and probably other older distros as

well):

The 'ulimit' command which is built into bash 1.x (the default for

Red Hat 6.2) uses the 32 bit versions of the system calls. The way

that glibc currently behaves means that requests to the 32bit

setrlimit, or getrlimit will translate 'unlimited' to '231 - 1' in

both directions (I would argue that setting a limit to RLIM_INFINITY

using the 32bit interface should end up in a call to the 64 bit

setrlimit variant with the 64 bit RLIM_INFITIY).

The default PAM configuration for sshd (/etc/pam.d/sshd), includes the line:

session required /lib/security/pam_limits.so

Which fiddles about with various limits (using the 32bit versions of

the calls).

If you log-in using ssh, and use bash 1.x to view the limits, you will

be told that your file size is unlimited, when it is in fact set to

2097151 (1024 byte) blocks!

Workaround:

Either:

Comment out the line in /etc/pam.d/sshd (note that limits set

in /etc/security/limits.conf will no longer be effective for ssh

logins)

Or: Rebuild the pam package with 64 bit support

Install the bash2 RPM

Either:

rename the old bash, and symlink /bin/bash2 to /bin/bash (you

may want to keep /bin/sh pointing at the old bash, if you are

worried about compatibility)

Or: use vipw to change users over to /bin/bash2

Other...

I don't have any other information yet. Feel free to send detailed information about

distributions if they supports LFS.

Some Other Often Requested Data about Filesystems

Please send me information to fill in the missing bits.

Maximum On-Disk Sizes of the Filesystems

Filesystem

File Size Limit

Filesystem Size Limit

ext2/ext3 with 1 KiB blocksize

16448 MiB (~ 16 GiB)

2048 GiB (= 2 TiB)

ext2/3 with 2 KiB blocksize

256 GiB

8192 GiB (= 8 TiB)

ext2/3 with 4 KiB blocksize

2048 GiB (= 2 TiB)

8192 GiB (= 8 TiB)

ext2/3 with 8 KiB blocksize (Systems with 8 KiB pages like Alpha only)

65568 GiB (~ 64 TiB)

32768 GiB (= 32 TiB)

ReiserFS 3.5

2 GiB

16384 GiB (= 16 TiB)

ReiserFS 3.6 (as in Linux 2.4)

1 EiB

16384 GiB (= 16 TiB)

XFS

8 EiB

8 EiB

JFS with 512 Bytes blocksize

8 EiB

512 TiB

JFS with 4KiB blocksize

8 EiB

4 PiB

NFSv2 (client side)

2 GiB

8 EiB

NFSv3 (client side)

8 EiB

8 EiB

Note Kernel Limitations: The table above describes

limitations of the on-disk format. The following kernel limits

exist:

On 32-bit systems with Kernel 2.4.x: The size of a file and a

block device is limited to 2 TiB. By using LVM several block

devices can be combined enabling the handling of larger file

systems.

64-bit systems: The sizes of a filesytem and of a file are

limited by 263 (8 EiB). But there might be hardware

driver limits that do not allow to access such large devices.

Kernel 2.6: For both 32-bit systems with option CONFIG_LBD set

and for 64-bit systems: The size of a file system is limited to

273 (far too much for today). On 32-bit systems

(without CONFIG_LBD set) the size of a file is limited to 2 TiB.

Note that not all filesystems and hardware drivers might handle

such large filesystems.

Note in the above:

1024 Bytes = 1 KiB;

1024 KiB = 1 MiB;

1024 MiB = 1 GiB; 1024 GiB = 1 TiB; 1024 TiB = 1 PiB; 1024 PiB = 1

EiB (check http://physics.nist.gov/cuu/Units/binary.html)

Maximum Number of Partitions

An IDE disk has 64 minors, one is used for the full disk and therefore

63 partitions are possible. A SCSI disk has 16 minors and therefore

only 15 partitions maximal.

Links

Thanks

Thanks to Andi Kleen, Matti Aarnio, Rogier Wolff, Chris Mason,

Andreas Schwab, Lenz Grimmer, Andries Brouwer, Urban Widmark, Bruce

Allen and Jana Jaeger for additions to and comments on the contents of

this page.

Last modified: Tue Feb 15 12:59:13 CET 2005