模糊数学故障matlab仿真,基于模糊聚类的转子故障诊断与分析论文+外文翻译+开题报告...-CSDN博客

内容介绍

摘要：模糊聚类是通过模糊数学方法对已知类别的各参数进行比较，找出规律来推断和预报未知类别的属性。本文以转子故障数据为对象，运用了模糊聚类方法和C-均值聚类方法对转子故障数据进行了处理，利用Matlab工具对转子故障诊断的系统进行了仿真和调试，并进行了可行性验证。

完成设计内容如下：

1、用模糊聚类方法对转子故障数据进行处理，建立模糊矩阵，从而求得相似系数，来进行数据的标定。然后使用传递闭包法对标定的模糊相似矩阵用平方法计算，利用Matlab求得传递闭包，最后进行聚类。

2、用C-均值聚类方法利用公式计算转子故障数据的相似矩阵，利用Matlab从初始矩阵算出迭代次数，得到模糊矩阵，并对此进行聚类。将方法应用于抽风机故障数据，再次进行验证。

关键词：转子故障诊断；模糊聚类；相似矩阵；传递闭包

Rotor Fault Diagnosis and Analysis

Based on Fuzzy clustering Method

Abstract: Fuzzy clustering is comparing the parameters of the known types through fuzzy mathematics to find out the laws which could be used in indentifying and forecasting the properties of the unknown categories. As rotor fault data as the object, this thesis has used both fuzzy clustering method and C-means clustering method to process the rotor fault data. At the same time, the system of rotor fault diagnosis has been simulated and debugged by Matlab, which has verified the feasibility of fuzzy clustering method.

Its basic design process is as follows:

1, Using fuzzy clustering method for rotor fault data processing, fuzzy matrix, and thus achieve a similar coefficient to the calibration data. Then use the transitive closure method of calibration of the fuzzy similarity matrix calculated using Matlab to seek transitive closure, the final cluster.

2, Using C-means clustering method of rotor fault using a formula similar to the data matrix, use of Matlab matrix calculated from the initial iteration, the fuzzy matrix, and this cluster. Method has been applied to fault data exhaust fan once again to verify.

Keywords: Rotor fault diagnosis; Fuzzy clustering; Similarity matrix; Transitive closure.

Classification:TP2

摘要II

目录III

1.引言1

1.1国内外研究现状1

1.1.1模糊聚类应用领域2

1.1.2 其他用于故障诊断的方法3

1.2 研究思路3

1.2.1 理论基础和分析3

1.2.2 研究设想、方法6

1.3研究的意义6

2. 模糊聚类的原理7

2.1 模糊聚类7

2.1.1模糊聚类的理论基础7

2.1.2 聚类的方法9

2.2 模糊逻辑原理 12

3.转子故障的诊断与分析14

3.1模糊聚类法对故障数据进行诊断与分析17

3.1.1聚类步骤18

3.1.2 利用Matlab程序得到的聚类谱系图19

3.2模糊C-均值聚类方法对故障数据进行诊断分析19

3.2.1 模糊C-均值聚类步骤20

3.2.2 聚类谱系图的获得22

3.3 聚类与分析24

3.3.1二十组数据测试24

3.3.2四十组数据测试25

3.3.3应用于抽风机故障数据验证 26

4.总结29

参考文献29

附录主要程序和矩阵31

参考资料

[1] Zhao zhenyun, Xu yong mou,The basic and applications of fuzzy theory and neural networks，tsinghua university publish，1996.

[2] Wang dazhong et al.，“fuzzy theory ,expert systems, neural networks and their applications in fault diagnosis of the fourier transform”，Proceedings of the Chinese society for electrical engineering ，Vol.16, No.5, pp.349-353,1996.

[3] S.K.Bhattacharyya, et al.,“A neural network approach to transformer fault diagnosis using dissolved gaanalysis data”, NAPS’93, 1993.

[4] Wang caisheng，“The fault diagnosis method BPNN in detecting for fourier transform ”，Proceedings of the Chinese society for electricaengineering，Vol.17, No.5, pp.322-325, 1997．

[5] Baldi,“Neural networks and principal component analysis:learning from examples and local minima”,Neural Networks, 2:53-58, 1989.