[1] Litvin F L.Gear geometry and applied theory[M].New York:Prentice Hall,1994.
[2] Chen B K,Zhong H,Liu J Y,et al.Generation and investigation of a new cycloid drive with double contact[J].Mechanism and Machine Theory,2012,49:270/283.
[3] Litvin F L,Demenego A,Vecchiato D.Formation by branches of envelope to parametric families of surfaces and curves[J].Computer Methods in Applied Mechanics and Engineering,2001,190(35/36):4587/4608.
[4] Demenego A,Vecchiato D,Litvin F L,et al.Design and simulation of meshing of a cycloidal pump[J].Mechanism and Machine Theory,2002,37(3):311/332.
[5] Vecchiato D,Demenego A,Argyris J,et al.Geometry of a cycloidal pump[J].Computer Methods in Applied Mechanics and Engineering,2001,190(18/19):2309/2330.
[6] Shin J H,Kwon S M.On the lobe profile design in a cycloid reducer using instant velocity center[J].Mechanism and Machine Theory,2006,41(5):596/616.
[7] Shin J H,Chang S,Kwon S M,et al.New shape design method of an epicycloidal gear for an epicycloid drive[C]// ICMIT 2005:Mechatronics,MEMS,and Smart Materials.[Sl]:SPIE,2005:60401G1/G6.
[8] Lin C,Gong H,Nie N,et al.Geometry design,threedimensional modeling and kinematic analysis of orthogonal fluctuating gear ratio face gear drive[J].Proceedings of the Institution of Mechanical Engineers Part C:Journal of Mechanical Engineering Science,2013,227(4):779/793.
[9] 李建刚,吴序堂,毛世民,等.非圆齿轮齿廓数值计算的研究[J].西安交通大学学报,2005,39(1):75/78.(Li Jiangang,Wu Xutang,Mao Shimin,et al.Numerical computation of tooth profile of noncircular gear[J].Journal of Xi’an Jiaotong University,2005,39(1):75/78.)