单片机 c语言led渐亮,51单片机渐亮渐暗 跑马灯的实现

#include

#include

#include

void liushui();

void rjl();    //渐亮

void rja();    //渐暗

void huaxin();

void huaxin2();

void huaxin3();

void zkb(unsigned char d);

void ys1ms(unsigned int s);  //延时声明，修改s的数值，就可以改变时间

unsigned char code table[11]={0xff,0xff ,0xfe,0xfd,0xfb,0xf7,0xef,0xdf,0xbf,0x7f,0xff};

unsigned char code table6[11]={0xff,0xff ,0x7f,0xbf,0xdf,0xef,0xf7,0xfb,0xfd,0xfe,0xff};

unsigned char code table2[8]={0x7f,0x3f ,0x1f,0x0f,0x07,0x03,0x01,0x00};

unsigned char code table3[8]={0xfe,0xfc ,0xf8,0xf0,0xe0,0xc0,0x80,0x00};

unsigned char code table4[9]={0x00,0x01 ,0x03,0x07,0x0f,0x1f,0x3f,0x7f,0xff};

unsigned char code table5[9]={0x00,0x80 ,0xc0,0xe0,0xf0,0xf8,0xfc,0xfe,0xff};

unsigned char i;

unsigned char j;

unsigned char k;

unsigned char m;

int main()

{

EA=1;//打开中断,使用中断方便调试查看模式

EX0=1; //允许外部中断0中断

EX1=1; //允许外部中断1中断

PX0=1; // 外部中断0位高优先级

while(1)  //无限循环

{

liushui();   

ys1ms(50);

huaxin2();

ys1ms(50);

rja();

ys1ms(100);

huaxin();   

rjl();

rja();

ys1ms(100);

huaxin3();   

rja();

ys1ms(100);

}

return 0;

}

void liushui()

{

for(i = 9; i > 0; i--)

{

P1 = table[ i];

[ i]            ys1ms(50);

[ i]        }

[ i]        for(i = 2; i <= 10; i++)

[ i]        {

[ i]            P0 = table[ i];

[ i][ i]             ys1ms(50);

[ i][ i]        }

[ i][ i]        for(i = 9; i > 0; i--)

[ i][ i]        {

[ i][ i]            P2 = table[ i];

ys1ms(50);

}

for(i = 9; i > 0; i--)

{

P3 = table[ i];

ys1ms(50);

}

}

void ys1ms(unsigned int s)    //定时器精确延时1毫秒函数，改变S数值即改变时间

{

TR0=1;

while(s!=0)

{

TH0=-(7629/256);

TL0=-(7629%256);

while(TF0!=1);

TF0=0;

s--;

}

TR0=0;

}

/****************************************************************************/

void rjl()  //渐亮函数

{

unsigned char a, b;//a控制延时长度　b控制循环周期

P0 = 0xff;

P1 = 0xff;

P2 = 0xff;

P3 = 0xff;

a = 0;

for (b=250; b>0; b--)   //循环周期设置

{

a++;

zkb (a);      //延时长度随a而改变

P0 = 0xff;

P1 = 0xff;

P2 = 0xff;

P3 = 0xff;

a = ~a;         //a值取反，决定灯灭时的占空比

zkb (a);

P0 = 0x00;

P1 = 0x00;

P2 = 0x00;

P3 = 0x00;

a = ~a;         //a值取反　使a回到原值继续循环

}

}

/****************************************************************************/

void rja()  //渐暗函数

{

unsigned char a, b;//a控制延时长度　b控制循环周期

P0 = 0x00;

P1 = 0x00;

P2 = 0x00;

P3 = 0x00;            //亮起LED

a = 0;

for (b=250; b>0; b--)

{

a++;

zkb (a);

P0 = 0x00;

P1 = 0x00;

P2 = 0x00;

P3 = 0x00;

a = ~a;

zkb (a);

P0 = 0xff;

P1 = 0xff;

P2 = 0xff;

P3 = 0xff;

a = ~a;

}

}

void huaxin()

{

for(j = 0; j < 2; j++)

{

for(i = 0; i < 8; i++)

{

P1 = table2[ i];

P3 = table3[ i];

ys1ms(50);

}

for(i = 0; i < 8; i++)

{

P0 = table3[ i];

P2 = table3[ i];

ys1ms(50);

}

for(i = 0; i < 9; i++)

{

P2 = table5[ i];

P0 = table5[ i];

ys1ms(50);

}

for(i = 0; i < 9; i++)

{

P3 = table5[ i];

P1 = table4[ i];

ys1ms(50);

}

ys1ms(100);

}

}

void huaxin2()

{

for(i = 0; i < 8; i++)

{

P1 = table2[ i];

ys1ms(50);

}

for(i = 0; i < 8; i++)

{

P0 = table3[ i];

ys1ms(50);

}

for(i = 0; i < 8; i++)

{

P2 = table2[ i];

ys1ms(50);

}

for(i = 0; i < 8; i++)

{

P3 = table2[ i];

ys1ms(50);

}

}

void huaxin3()

{

k = 0;

for(m = 0; m < 2; m++)

{

for(j = 0; j < 4; j++)

{

for(i = 9; i > 0; i--)

{

P1 = table[ i];

P0 = table6[ i];

P2 = table[ i];

P3 = table[ i];

ys1ms(50);

}

}

for(i = 0; i < 8; i++)

{

P1 = table2[ i];

P0 = table3[ i];

P2 = table2[ i];

P3 = table2[ i];

ys1ms(50);

}

if(k == 0)

{

for(i = 0; i < 8; i++)

{

P1 = table5[ i];

P0 = table4[ i];

P2 = table5[ i];

P3 = table5[ i];

ys1ms(50);

}

}

ys1ms(100);

k++;

}

}

/****************************************************************************/

void zkb(unsigned char d)   //占空比函数，由d决定延时长度

{

unsigned char i;

while( --d != 0)

{

for(i = 0; i < 1; i++);   //占空比时间设置

}

}