linux查看pcie网卡命令,kudzu命令查看及设置网卡等硬件信息

kudzu 是Linux下检测硬件变化的命令，这个命令可以用于检查系统中网卡的型号等信息：

kudzu(1)

NAME

kudzu - detects and configures new and/or changed hardware on a system

SYNOPSIS

kudzu

DESCRIPTION

kudzu detects and configures new and/or changed hardware on a system.

When started, kudzu detects the current hardware, and checks it against

a database stored in /etc/sysconfig/hwconf, if one exists. It then

determines if any hardware has been added or removed from the system.

If so, it gives the users the opportunity to configure any added hard-

ware, and unconfigure any removed hardware. It then updates the

database in /etc/sysconfig/hwconf.

If no previous database exists, kudzu attempts to determine what

devices have already been configured, by looking at /etc/modules.conf,

/etc/sysconfig/network-scripts/, and /etc/X11/XF86Config.

以下是这个命令执行的输出示例：

[root@wapdbrac1 ~]# kudzu --probe --class=network

-

class: NETWORK

bus: PCI

detached: 0

device: eth1

driver: bnx2

desc: "Broadcom Corporation NetXtreme II BCM5708 Gigabit Ethernet"

network.hwaddr: 00:1B:78:97:E4:EA

vendorId: 14e4

deviceId: 164c

subVendorId: 103c

subDeviceId: 7038

pciType: 1

pcidom:    0

pcibus:  5

pcidev:  0

pcifn:  0

-

class: NETWORK

bus: PCI

detached: 0

device: eth0

driver: bnx2

desc: "Broadcom Corporation NetXtreme II BCM5708 Gigabit Ethernet"

network.hwaddr: 00:1B:78:97:E4:EC

vendorId: 14e4

deviceId: 164c

subVendorId: 103c

subDeviceId: 7038

pciType: 1

pcidom:    0

pcibus:  3

pcidev:  0

pcifn:  0

本篇文章来源于《点睛考试网》[] ；原文链接地址：[@more@]自动配置安装 如果安装完Linux系统后，又添加了新的硬件，那么系统必须载入正确的驱动程序才可以使用它。

Kudzu服务默认每次启动时都要运行，如果需要缩短启动时间，使用下面命令可以停止系统启动时的kudzu服务： # chkconfig kudzu off 如果要安装新的硬件，可以手动运行kudzu程序。

以上介绍了Linux下驱动程序的大体结构、主要的加载方式和相关配置文件，在安装Linux时加载驱动程序，并且根据需要定制自己的引导盘，在安装完成后安装新的、即插即用硬件。