android系统如何编译环境,Android系统编译环境_(2)

在“Android系统编译环境(1)中”我们试用了通过标准的Android.mk文件来编译C模块，下面我们来试试如何直接运用gcc命令行来编译，从而了解环境的细节。

环境提供了”showcommands”选项来显示编译命令行，我们可以通过打开这个选项来查看一些编译时的细节。

当然，在这之前要把上一篇中的helloworld模块clean:

# make clean-helloworld上面的“make clean-$(LOCAL_MODULE)”是环境提供的make clean的方式。

接下来使用showcommands选项重新编译helloworld:

# make helloworld showcommands

build/core/product_config.mk:229: WARNING: adding test OTA key

target thumb C: helloworld <= development/hello/hello.c

prebuilt/linux-x86/toolchain/arm-eabi-4.2.1/bin/arm-eabi-gcc -I system/core/include -I hardware/libhardware/include -I hardware/ril/include -I dalvik/libnativehelper/include -I frameworks/base/include -I external/skia/include -I out/target/product/generic/obj/include -I bionic/libc/arch-arm/include -I bionic/libc/include -I bionic/libstdc++/include -I bionic/libc/kernel/common -I bionic/libc/kernel/arch-arm -I bionic/libm/include -I bionic/libm/include/arch/arm -I bionic/libthread_db/include -I development/hello -I out/target/product/generic/obj/EXECUTABLES/helloworld_intermediates -c -fno-exceptions -Wno-multichar -march=armv5te -mtune=xscale -msoft-float -fpic -mthumb-interwork -ffunction-sections -funwind-tables -fstack-protector -D__ARM_ARCH_5__ -D__ARM_ARCH_5T__ -D__ARM_ARCH_5E__ -D__ARM_ARCH_5TE__ -include system/core/include/arch/linux-arm/AndroidConfig.h -DANDROID -fmessage-length=0 -W -Wall -Wno-unused -DSK_RELEASE -DNDEBUG -O2 -g -Wstrict-aliasing=2 -finline-functions -fno-inline-functions-called-once -fgcse-after-reload -frerun-cse-after-loop -frename-registers -DNDEBUG -UDEBUG -mthumb -Os -fomit-frame-pointer -fno-strict-aliasing -finline-limit=64 -MD -o out/target/product/generic/obj/EXECUTABLES/helloworld_intermediates/hello.o development/hello/hello.c

target Executable: helloworld (out/target/product/generic/obj/EXECUTABLES/helloworld_intermediates/LINKED/helloworld)

prebuilt/linux-x86/toolchain/arm-eabi-4.2.1/bin/arm-eabi-g++ -nostdlib -Bdynamic -Wl,-T,build/core/armelf.x -Wl,-dynamic-linker,/system/bin/linker -Wl,--gc-sections -Wl,-z,nocopyreloc -o out/target/product/generic/obj/EXECUTABLES/helloworld_intermediates/LINKED/helloworld -Lout/target/product/generic/obj/lib -Wl,-rpath-link=out/target/product/generic/obj/lib -lc -lstdc++ -lm out/target/product/generic/obj/lib/crtbegin_dynamic.o out/target/product/generic/obj/EXECUTABLES/helloworld_intermediates/hello.o -Wl,--no-undefined prebuilt/linux-x86/toolchain/arm-eabi-4.2.1/bin/../lib/gcc/arm-eabi/4.2.1/interwork/libgcc.a out/target/product/generic/obj/lib/crtend_android.o

target Non-prelinked: helloworld (out/target/product/generic/symbols/system/bin/helloworld)

out/host/linux-x86/bin/acp -fpt out/target/product/generic/obj/EXECUTABLES/helloworld_intermediates/LINKED/helloworld out/target/product/generic/symbols/system/bin/helloworld

target Strip: helloworld (out/target/product/generic/obj/EXECUTABLES/helloworld_intermediates/helloworld)

out/host/linux-x86/bin/soslim --strip --shady --quiet out/target/product/generic/symbols/system/bin/helloworld --outfile out/target/product/generic/obj/EXECUTABLES/helloworld_intermediates/helloworld

Install: out/target/product/generic/system/bin/helloworld

out/host/linux-x86/bin/acp -fpt out/target/product/generic/obj/EXECUTABLES/helloworld_intermediates/helloworld out/target/product/generic/system/bin/helloworld

从上面的命令行可以看到，环境所用的交叉编译工具链是prebuilt/linux-x86/toolchain/arm-eabi-4.2.1/bin/arm-eabi-gcc，-I和-L参数指定了所用的C库头文件和动态库文件路径分别是bionic/libc/include和out/target/product/generic/obj/lib，其他还包括很多编译选项以及-D所定义的预编译宏。

我们可以利用上面的编译命令，稍加简化来手工编译helloworld程序。先手工删除上次编译得到的helloworld程序：# rm out/target/product/generic/obj/EXECUTABLES/helloworld_intermediates/hello.o

# rm out/target/product/generic/system/bin/helloworld

再用gcc编译，生成目标文件：# prebuilt/linux-x86/toolchain/arm-eabi-4.2.1/bin/arm-eabi-gcc -I bionic/libc/arch-arm/include -I bionic/libc/include -I bionic/libc/kernel/common -I bionic/libc/kernel/arch-arm -c -fno-exceptions -Wno-multichar -march=armv5te -mtune=xscale -msoft-float -fpic -mthumb-interwork -ffunction-sections -funwind-tables -fstack-protector -D__ARM_ARCH_5__ -D__ARM_ARCH_5T__ -D__ARM_ARCH_5E__ -D__ARM_ARCH_5TE__ -include system/core/include/arch/linux-arm/AndroidConfig.h -DANDROID -fmessage-length=0 -W -Wall -Wno-unused -DSK_RELEASE -DNDEBUG -O2 -g -Wstrict-aliasing=2 -finline-functions -fno-inline-functions-called-once -fgcse-after-reload -frerun-cse-after-loop -frename-registers -DNDEBUG -UDEBUG -mthumb -Os -fomit-frame-pointer -fno-strict-aliasing -finline-limit=64 -MD -o out/target/product/generic/obj/EXECUTABLES/helloworld_intermediates/hello.o development/hello/hello.c

与Android.mk编译参数比较，上面主要减少了不必要的-I参数。

接下来生成可执行文件：# prebuilt/linux-x86/toolchain/arm-eabi-4.2.1/bin/arm-eabi-gcc -nostdlib -Bdynamic -Wl,-T,build/core/armelf.x -Wl,-dynamic-linker,/system/bin/linker -Wl,--gc-sections -Wl,-z,nocopyreloc -o out/target/product/generic/obj/EXECUTABLES/helloworld_intermediates/LINKED/helloworld -Lout/target/product/generic/obj/lib -Wl,-rpath-link=out/target/product/generic/obj/lib -lc -lm out/target/product/generic/obj/EXECUTABLES/helloworld_intermediates/hello.o out/target/product/generic/obj/lib/crtbegin_dynamic.o -Wl,--no-undefined ./prebuilt/linux-x86/toolchain/arm-eabi-4.2.1/bin/../lib/gcc/arm-eabi/4.2.1/interwork/libgcc.a out/target/product/generic/obj/lib/crtend_android.o

这里值得留意的是参数“-Wl,-dynamic-linker,/system/bin/linker”，它指定了Android专用的动态链接器/system/bin/linker，而不是通常所用的ld.so。

生成的可执行程序可用file和readelf命令来查看一下：

# file helloworld

out/target/product/generic/obj/EXECUTABLES/helloworld_intermediates/LINKED/helloworld: ELF 32-bit LSB executable, ARM, version 1 (SYSV), dynamically linked (uses shared libs), not stripped

# readelf -d helloworld | grep NEEDED

0x00000001 (NEEDED) Shared library: [libc.so]

0x00000001 (NEEDED) Shared library: [libm.so]这是格式的动态链接可执行文件，运行时需要libc.so和libm.so。“not stripped”表示它还没被STRIP。中为节省空间通常将编译完成的可执行文件或动态库进行STRIP，即去掉其中多余的符号表信息。在前面“make helloworld showcommands”命令的最后我们也可以看到，环境中使用了out/host/linux-x86/bin/soslim工具进行STRIP。