青州码头小型机项目实施方案
(Solaris 10 U7 + Oracle 10g + ZFS + Sun Cluster 3.2 U2)
文档二、安装配置SUN Enterprise M4000 主机
一、配置M4000 主机控制卡(管理控制台)
1. 使用服务器附带的串行电缆将管理控制台连接到串行端口。
2. 打开超级终端,使用以下设置:
■ 波特率:9600 bps
■ 数据长度:8 位
■ 奇偶校验:无
■ 停止位:1 位
■ 流量控制:无
3. 将操作面板上的钥匙设置到“维修”位置。
类似扳手的图标指示的是“维修”位置,类似锁的图标指示的是“锁定”位置。
4. 打开输入电源。
5. 出现 login 提示时,输入登录名的默认值:default
6. 将操作面板上的钥匙设置到“锁定”位置。
7. 按回车键。
先等待五秒钟,将操作面板上的钥匙设置到“维修”位置,然后按回车键。
管理控制台上显示了 XSCF Shell 提示符。XSCF>
两台主机均需要配置
二、初始化主机控制卡设置
1、创建管理用户fqct
XSCF>usera fqct
XSCF>password fqct
XSCF> setprivileges fqct platadm useradm auditadm fieldeng mode
2、配置控制台IP 地址
XSCF>setupplatform -p network
Do you want to set up networking? [y|n]: y
Do you want to set up the XSCF network interfaces? [y|n]: y
Do you want to configure xscf#0-lan#0? [y|n]: y
xscf#0-lan#0 ip a ress? []: 23 (主机二为33)
xscf#0-lan#0 netmask? []:
xscf#0-lan#0 default gateway? []: 00
Are these settings correct? [y|n]: y
Do you want to configure xscf#0-lan#1? [y|n]: n
Do you want to configure lan#0? [y|n]: n
Do you want to configure lan#1? [y|n]: n
Do you want to set up the DSCP network? [y|n]: n
Primary DNS server ip address: 9
Secondary DNS server ip address:
Tertiary DNS server ip address:
Domain name:
XSCF#0 hostname: qzoradb2
Do you want to set up the domain name service? [y|n]: n
Do you want to set up the network time protocol? [y|n]: n
Do you want to set up ssh? [y|n]: n
Do you want to set up https? [y|n]: n
Do you want to configure email reports? [y|n]: n
三、设置光盘引导准备安装操作系统
1、关闭主机电源(若主机是开着的)
XSCF>poweroff –f –d 0
-f 参数代表强行关闭
2、设置主机启动进OK 模式
XSCF>setdomainmode -y -d 0 -m autoboot=off
开始安装操作系统后使用以下命令改回正常模式
XSCF>setdomainmode -y -d 0 -m autoboot=on
3、打开主机电源
XSCF>poweron –d 0
4 、放入Solaris 10 系统安装光盘,在OK 提示符下使用boot cdrom 命令开始光盘引导安装
系统。
OK boot cdrom
四、安装Solaris 10 操作系统
安装过程中无特别说明的部分按照系统默认选项安装。
选择6简体中文
选择12 X终端
选择e1000g0这块网卡,安装过程中先配置一块网卡即可,能