nginx tornado php,tornado 使用supervisor管理进程，使用nginx做负载均衡

tornado 使用supervisor管理进程，使用nginx做负载均衡

部署方式

采用nginx作为load banlancernginx的配置文件如下，放在/etc/nginx/sites-avaiable/下，然后再sites-enable下面创建软连接

nginx有一个基础配置会include sites-enable下的文件。

以下代码是被配置的http{}部分所include

upstream detect_data_server {

server 127.0.0.1:8001;

server 127.0.0.1:8002;

server 127.0.0.1:8003;

server 127.0.0.1:8004;

}

# Only retry if there was a communication error, not a timeout

# on the Tornado server (to avoid propagating "queries of death"

# to all frontends)

# proxy_next_upstream error; # this has been in nginx.conf

server {

listen 80;

location / {

proxy_pass_header Server;

proxy_set_header Host $http_host;

proxy_redirect off;

proxy_set_header X-Real-IP $remote_addr;

proxy_set_header X-Scheme $scheme;

proxy_pass http://detect_data_server;

}

}

运行命令：sudo cp /home/opsys/running/detect-datacollect-server/deploy/detect-datacollect-server.conf

/etc/nginx/sites-available

sudo ln -s /etc/nginx/sites-available/detect-datacollect-server.conf

/etc/nginx/sites-enabled/detect-datacollect-server.conf

sudo service nginx start

注意：启动nginx时要注意sites-available目录下面的default，在nginx.conf中不要include了这个文件

不同的系统对应的目录不一样，要注意

使用supervisor进行管理安装supervisor最好用apt-get install 安装

放在/etc/supervisor/conf.d/目录下面。和nginx一样，supervisor也有一个基础配置

为/etc/supervisor/supervisord.conf，这个文件会去include conf.d中的文件

以下为配置：

; To take advantage of multiple cores, you'll need multiple processes.

[group:gp_detect_data]

programs=detect_data

[program:detect_data]

; envir ; TEST for test environ.

command=python /home/opsys/running/detect-datacollect-server/code/app.py --port=80%(process_num)02d

process_name = %(program_name)s%(process_num)d

autorestart=true

redirect_stderr=true

stdout_logfile=/home/opsys/log/detect-data-stdout.log

stdout_logfile_maxbytes=50MB

stdout_logfile_backups=10

stderr_logfile=/home/opsys/log/detect-data-stderr.log

loglevel=info

numprocs = 4

numprocs_start = 1

运行命令：sudo cp /home/opsys/running/detect-datacollect-server/conf/supervisor/detect_data.conf

/etc/supervisor/conf.d/

sudo service supervisor start

log目录

具体的要看配置文件中的配置程序log：/home/opsys/log/detect-data-stdout.log

supervisor的log: /var/log/supervisor/supervisord.log

nginx log：/var/log/nginx/

参考

https://github.com/tornadoweb/tornado/wiki/Deployment

https://gist.github.com/didip/802561

http://gracece.com/2014/03/Tornado-supervisor+nginx/

http://www.tornadoweb.org/en/stable/guide/running.html

第八章：https://github.com/alioth310/itt2zh/blob/master/ch8.html').addClass('pre-numbering').hide();

$(this).addClass('has-numbering').parent().append($numbering);

for (i = 1; i <= lines; i++) {

$numbering.append($('

').text(i));

};

$numbering.fadeIn(1700);

});

});

以上就介绍了tornado 使用supervisor管理进程，使用nginx做负载均衡，包括了方面的内容，希望对PHP教程有兴趣的朋友有所帮助。

本文原创发布php中文网，转载请注明出处，感谢您的尊重！