ESXi操作系统为6.5和6.7版本，执行/usr/lib/vmware/vmkmgmt_keyval/vmkmgmt_keyval -a命令。[root@localhost:~] /usr/lib/vmware/vmkmgmt_keyval/vmkmgmt_keyval -a
Listing all system keys:
Key Value Instance: vmhba3/Emulex
Listing keys:
Name:adapter
Type:string
value:
lpfc Adapter Page
Emulex LightPulse FC SCSI 10.2.309.8
EMC LPe12002-E 8Gb 2-port PCIe Fibre Channel Adapter on PCI bus 0000:05 device 00 fn 1 port 1 Link Speed: 8000 Gb
BoardNum:1
FW Version: 2.00A5
HW Version: 31004549
ROM Version:5.03a13
SerialNum:VM14949181
Vendor Id:f10010df
...
Name:param
Type:string
value:Configuration Parameters for lpfc1
Name Low High Dflt Current Description
log-verbose 0 7fffffff 0 0 Verbose logging bit-mask
lun-queue-depth 1 200 1e 1e Max number of FCP commands we can queue to a specific LUN
devloss-tmo 1 ff a 1 Seconds driver hold I/O waiting for a loss device to return
use-adisc 0 1 0 0 Use ADISC on rediscovery to authenticate FCP devices
first-burst-size 0 10000 0 0 First burst size for Targets that support first burst
max-scsicmpl-time 0 ea60 0 0 Use command completion time to control queue depth
fcp2-no-tgt-reset 0 1 0 0 Determine bus reset behavior for FCP2 devices 0-issue tgt reset, 1-no tgt reset
topology 0 6 0 0 Select Fibre Channel topology: valid values are 0,1,2,4,6. See driver manual
link-speed 0 10 0 0 Select link speed: [ 2 4 8 ] or 0 for auto negotiate
task-mgmt-tmo 5 b4 3c 3c Maximum time to wait for task management commands to complete
XLanePriority 0 7f 0 0 CS_CTL for ExpressLane.
compression-log 5 15180 12c 12c Frequency compression logs are written (seconds)
throttle-log-cnt 1 3e8 a a Do not exceed this number of messages logged within throttle_log_time
throttle-log-time 1 3c 1 1 Do not exceed throttle_log_cnt within this limit (seconds)
...
Name:param
Type:string
value:Configuration Parameters for lpfc0
Name Low High Dflt Current Description
log-verbose 0 7fffffff 0 0 Verbose logging bit-mask
lun-queue-depth 1 200 1e 1e Max number of FCP commands we can queue to a specific LUN
devloss-tmo 1 ff a 1 Seconds driver hold I/O waiting for a loss device to return
use-adisc 0 1 0 0 Use ADISC on rediscovery to authenticate FCP devices
first-burst-size 0 10000 0 0 First burst size for Targets that support first burst
max-scsicmpl-time 0 ea60 0 0 Use command completion time to control queue depth
fcp2-no-tgt-reset 0 1 0 0 Determine bus reset behavior for FCP2 devices 0-issue tgt reset, 1-no tgt reset
topology 0 6 0 0 Select Fibre Channel topology: valid values are 0,1,2,4,6. See driver manual
link-speed 0 10 0 0 Select link speed: [ 2 4 8 ] or 0 for auto negotiate
task-mgmt-tmo 5 b4 3c 3c Maximum time to wait for task management commands to complete
XLanePriority 0 7f 0 0 CS_CTL for ExpressLane.
compression-log 5 15180 12c 12c Frequency compression logs are written (seconds)
throttle-log-cnt 1 3e8 a a Do not exceed this number of messages logged within throttle_log_time
throttle-log-time 1 3c 1 1 Do not exceed throttle_log_cnt within this limit (seconds)
...
Module Parameters
...
ql2xloadfwbin = 1
ql2xdbwr = 1
ql2xbypass_log_throttle = 0
ql2xt10protmask = 85
ql2xt10enable = 1
ql2xt10guard = 3
ql2xenablehba_err_chk = 2
qlfxdisablewatchdogtimer = 0
qlfxdisablereset = 0
qlfxmaxqdepth = 32
qlfxmaxqueues = 1
qlfxmaxlun = 65535
qlfxtargetreset = 1
qlfxcmdtimeout = 20
qlfxmaxsgs = 0
qlfxmaxxfersize = 0
949
被折叠的 条评论
为什么被折叠?
到【灌水乐园】发言
