Linux input子系统详解

一:前言

最近在研究android的sensor driver,主要是E-compass,其中用到了Linux input子系统.在网上也看了很多这方面的资料,感觉还是这篇分析的比较细致透彻,因此转载一下以便自己学习,同时和大家分享!

(这篇博客主要是以键盘驱动为例的,不过讲解的是Linux Input Subsystem,可以仔细的研究一下!)

键盘驱动将检测到的所有按键都上报给了input子系统。Input子系统是所有I/O设备驱动的中间层,为上层提供了一个统一的界面。例如,在终 端系统中,我们不需要去管有多少个键盘,多少个鼠标。它只要从input子系统中去取对应的事件(按键,鼠标移位等)就可以了。

二:使用input device的例子

下面的代码是基于linux kernel 2.6.25.分析的代码主要位于kernel2.6.25/drivers/input下面.

在内核自带的文档Documentation/input/input-programming.txt中。有一个使用input子系统的例子,并附带相应的说明。以此为例分析如下:

#include <linux/input.h>
#include <linux/module.h>
#include <linux/init.h>

#include <asm/irq.h>
#include <asm/io.h>

static struct input_dev *button_dev;

static irqreturn_t button_interrupt(int irq, void *dummy)
{
	input_report_key(button_dev, BTN_0, inb(BUTTON_PORT) & 1);
	input_sync(button_dev);
	return IRQ_HANDLED;
}

static int __init button_init(void)
{
	int error;

	if (request_irq(BUTTON_IRQ, button_interrupt, 0, "button", NULL)) {
		printk(KERN_ERR "button.c: Can't allocate irq %d\n", button_irq);
		return -EBUSY;
	}

	button_dev = input_allocate_device();
	if (!button_dev) {
		printk(KERN_ERR "button.c: Not enough memory\n");
		error = -ENOMEM;
		goto err_free_irq;
	}

	button_dev->evbit[0] = BIT_MASK(EV_KEY);
	button_dev->keybit[BIT_WORD(BTN_0)] = BIT_MASK(BTN_0);

	error = input_register_device(button_dev);
	if (error) {
		printk(KERN_ERR "button.c: Failed to register device\n");
		goto err_free_dev;
	}

	return 0;

err_free_dev:
	input_free_device(button_dev);
err_free_irq:
	free_irq(BUTTON_IRQ, button_interrupt);
	return error;
}

static void __exit button_exit(void)
{
	input_unregister_device(button_dev);
	free_irq(BUTTON_IRQ, button_interrupt);
}

module_init(button_init);
module_exit(button_exit);

这个示例module代码还是比较简单,在初始化函数里注册了一个中断处理例程。然后注册了一个input device.在中断处理程序里,将接收到的按键上报给input子系统。文档的作者在之后的分析里又对这个module作了优化。主要是在注册中断处理 的时序上。在修改过后的代码里,为input device定义了open函数,在open的时候再去注册中断处理例程(Gick:因为init里首先注册中断,但是这个中断里上报的按键事件依赖中断注册后面的注册按键事件,所以时序有问题)。具体的信息请自行参考这篇文档。在资料缺乏的情况下,kernel自带的文档就 是剖析kernel相关知识的最好资料.文档的作者还分析了几个api函数。列举如下:

1): set_bit(EV_KEY, button_dev.evbit);

      set_bit(BTN_0, button_dev.keybit);

分别用来设置设备所产生的事件以及上报的按键值。Struct iput_dev中有两个成员,一个是evbit.一个是keybit.分别用表示设备所支持的事件和按键类型。

2): input_register_device(&button_dev);

用来注册一个input device.

3): input_report_key()

用于给上层上报一个按键动作

4): input_sync()

用来告诉上层,本次的事件已经完成了.

5): NBITS(x) - returns the length of a bitfield array in longs for x bits

     LONG(x) - returns the index in the array in longs for bit x

     BIT(x)   - returns the index in a long for bit x     

这几个宏在input子系统中经常用到。上面的英文解释已经很清楚了。

三:input设备注册分析

Input设备注册的接口为:input_register_device()。代码如下:

int input_register_device(struct input_dev *dev)

{

         static atomic_t input_no = ATOMIC_INIT(0);

         struct input_handler *handler;

         const char *path;

         int error;

         __set_bit(EV_SYN, dev->evbit);

         /*

         * If delay and period are pre-set by the driver, then autorepeating

         * is handled by the driver itself and we don't do it in input.c.

         */

         init_timer(&dev->timer);

         if (!dev->rep[REP_DELAY] && !dev->rep[REP_PERIOD]) {

                   dev->timer.data = (long) dev;

                   dev->timer.function = input_repeat_key;

                   dev->rep[REP_DELAY] = 250;

                   dev->rep[REP_PERIOD] = 33;

         }
Input_device的evbit表示该设备所支持的事件。在这里将其EV_SYN置位,即所有设备都支持这个事件.如果 dev->rep[REP_DELAY]和dev->rep[REP_PERIOD]没有设值,则将其赋默认值。这主要是处理重复按键的.(这个地方还没有仔细研究过,有点疑问 )

         if (!dev->getkeycode)

                   dev->getkeycode = input_default_getkeycode;

         if (!dev->setkeycode)

                   dev->setkeycode = input_default_setkeycode;

         snprintf(dev->dev.bus_id, sizeof(dev->dev.bus_id),

                   "input%ld", (unsigned long) atomic_inc_return(&input_no) - 1);

         error = device_add(&dev->dev);

         if (error)

                   return error;

         path = kobject_get_path(&dev->dev.kobj, GFP_KERNEL);

         printk(KERN_INFO "input: %s as %s\n",

                   dev->name ? dev->name : "Unspecified device", path ? path : "N/A");

         kfree(path);

         error = mutex_lock_interruptible(&input_mutex);

         if (error) {

                   device_del(&dev->dev);

                   return error;

         }

如果input device没有定义getkeycode和setkeycode.则将其赋默认值。然后调用device_add()将input_dev中封装的device注册到sysfs。

         list_add_tail(&dev->node, &input_dev_list);

         list_for_each_entry(handler, &input_handler_list, node)

                   input_attach_handler(dev, handler);

         input_wakeup_procfs_readers();

         mutex_unlock(&input_mutex);

         return 0;

}

 

这里就是重点了。将input device 挂到input_dev_list链表上.然后,对每一个挂在input_handler_list的handler调用 input_attach_handler().这里的情况好比设备模型中的device和driver的匹配。所有的input device都挂在input_dev_list链上。所有的handle都挂在input_handler_list上。

 

看一下这个匹配的详细过程。匹配是在input_attach_handler()中完成的。代码如下:

static int input_attach_handler(struct input_dev *dev, struct input_handler *handler)

{

         const struct input_device_id *id;

         int error;

         if (handler->blacklist && input_match_device(handler->blacklist, dev))

                   return -ENODEV;

         id = input_match_device(handler->id_table, dev);

         if (!id)

                   return -ENODEV;

         error = handler->connect(handler, dev, id);

         if (error && error != -ENODEV)

                   printk(KERN_ERR

                            "input: failed to attach handler %s to device %s, "

                            "error: %d\n",

                            handler->name, kobject_name(&dev->dev.kobj), error);

         return error;

}

如果handle的blacklist被赋值。要先匹配blacklist中的数据跟dev->id的数据是否匹配。匹配成功过后再来匹 配handle->id和dev->id中的数据。如果匹配成功,则调用handler->connect().

 

来看一下具体的数据匹配过程,这是在input_match_device()中完成的。代码如下:

static const struct input_device_id *input_match_device(const struct input_device_id *id, struct input_dev *dev)

{

         int i;

         for (; id->flags || id->driver_info; id++) {

                   if (id->flags & INPUT_DEVICE_ID_MATCH_BUS)

                            if (id->bustype != dev->id.bustype)

                                     continue;

                   if (id->flags & INPUT_DEVICE_ID_MATCH_VENDOR)

                            if (id->vendor != dev->id.vendor)

                                     continue;

                   if (id->flags & INPUT_DEVICE_ID_MATCH_PRODUCT)

                            if (id->product != dev->id.product)

                                     continue;

                   if (id->flags & INPUT_DEVICE_ID_MATCH_VERSION)

                            if (id->version != dev->id.version)

                                     continue;

                   MATCH_BIT(evbit, EV_MAX);

                   MATCH_BIT(,, KEY_MAX);

                   MATCH_BIT(relbit, REL_MAX);

                   MATCH_BIT(absbit, ABS_MAX);

                   MATCH_BIT(mscbit, MSC_MAX);

                   MATCH_BIT(ledbit, LED_MAX);

                   MATCH_BIT(sndbit, SND_MAX);

                   MATCH_BIT(ffbit, FF_MAX);

                   MATCH_BIT(swbit, SW_MAX);

                   return id;

         }

         return NULL;

}

 

MATCH_BIT宏的定义如下:

#define MATCH_BIT(bit, max) \

                   for (i = 0; i < BITS_TO_LONGS(max); i++) \

                            if ((id->bit[i] & dev->bit[i]) != id->bit[i]) \

                                     break; \

                   if (i != BITS_TO_LONGS(max)) \

                            continue;

由此看到。在id->flags中定义了要匹配的项。定义INPUT_DEVICE_ID_MATCH_BUS。则是要比较input device和input handler的总线类型。 INPUT_DEVICE_ID_MATCH_VENDOR,INPUT_DEVICE_ID_MATCH_PRODUCT,INPUT_DEVICE_ID_MATCH_VERSION 分别要求设备厂商。设备号和设备版本.

 

如果id->flags定义的类型匹配成功。或者是id->flags没有定义,就会进入到MATCH_BIT的匹配项了.从 MATCH_BIT宏的定义可以看出。只有当iput device和input handler的id成员在evbit, keybit,… swbit项相同才会匹配成功。而且匹配的顺序是从evbit, keybit到swbit.只要有一项不同,就会循环到id中的下一项进行比较.

 

简而言之,注册input device的过程就是为input device设置默认值(初始化),并将其挂到input_dev_list链表中.然后与挂载在input_handler_list中的 handler相匹配。如果匹配成功,就会调用handler的connect函数.

 

四:handler注册分析

Handler注册的接口如下所示:

int input_register_handler(struct input_handler *handler)

{

         struct input_dev *dev;

         int retval;

         retval = mutex_lock_interruptible(&input_mutex);

         if (retval)

                   return retval;

         INIT_LIST_HEAD(&handler->h_list);

         if (handler->fops != NULL) {

                   if (input_table[handler->minor >> 5]) {

                            retval = -EBUSY;

                            goto out;

                   }

                   input_table[handler->minor >> 5] = handler;

         }

         list_add_tail(&handler->node, &input_handler_list);

         list_for_each_entry(dev, &input_dev_list, node)

                   input_attach_handler(dev, handler);

         input_wakeup_procfs_readers();

out:

         mutex_unlock(&input_mutex);

         return retval;

}

handler->minor表示对应input设备节点的次设备号.以handler->minor右移五位做为索引值插入到input_table[ ]中..之后再来分析input_talbe[ ]的作用.

 

然后将handler挂到input_handler_list中.然后将其与挂在input_dev_list中的input device匹配.这个过程和input device的注册有相似的地方.都是注册到各自的链表,.然后与另外一条链表的对象相匹配.

五:handle的注册

int input_register_handle(struct input_handle *handle)

{

         struct input_handler *handler = handle->handler;

         struct input_dev *dev = handle->dev;

         int error;

         /*

         * We take dev->mutex here to prevent race with

         * input_release_device().

         */

         error = mutex_lock_interruptible(&dev->mutex);

         if (error)

                   return error;

         list_add_tail_rcu(&handle->d_node, &dev->h_list);

         mutex_unlock(&dev->mutex);

         synchronize_rcu();

         /*

         * Since we are supposed to be called from ->connect()

         * which is mutually exclusive with ->disconnect()

         * we can't be racing with input_unregister_handle()

         * and so separate lock is not needed here.

         */

         list_add_tail(&handle->h_node, &handler->h_list);

         if (handler->start)

                   handler->start(handle);

         return 0;

}

在这个函数里所做的处理其实很简单.将handle挂到所对应input device的h_list链表上. 再将handle挂到对应的handler的h_list链表上.如果handler定义了start函数,将调用之.

 

到这里,我们已经看到了input device, handler和handle是怎么关联起来的了.以图的方式总结如下:

但这个图上显示: 在Handler->event中调用input_register_handle(),但是我在code里面看到

/**
* input_register_handle - register a new input handle
* @handle: handle to register
*
* This function puts a new input handle onto device's
* and handler's lists so that events can flow through
* it once it is opened using input_open_device().
*
* This function is supposed to be called from handler's
* connect() method.
*/

建议在connect中调用input_register_handle(),这里也是有点疑问的。

六:event事件的处理

在开始的时候曾以linux kernel文档中自带的代码作分析.提出了几个事件上报的API. 这些API其实都是input_event()的封装.代码如下:

void input_event(struct input_dev *dev, unsigned int type, unsigned int code, int value)

{

         unsigned long flags;

         //判断设备是否支持这类事件

         if (is_event_supported(type, dev->evbit, EV_MAX)) {

                   spin_lock_irqsave(&dev->event_lock, flags);

                   //利用键盘输入来调整随机数产生器

                   add_input_randomness(type, code, value);

                   input_handle_event(dev, type, code, value);

                   spin_unlock_irqrestore(&dev->event_lock, flags);

         }

}

首先,先判断设备产生的这个事件是否合法.如果合法,流程转入到input_handle_event()中.

代码如下:

static void input_handle_event(struct input_dev *dev, unsigned int type, unsigned int code, int value)

{

         int disposition = INPUT_IGNORE_EVENT;

         switch (type) {

         case EV_SYN:

                   switch (code) {

                   case SYN_CONFIG:

                            disposition = INPUT_PASS_TO_ALL;

                            break;

                   case SYN_REPORT:

                            if (!dev->sync) {

                                     dev->sync = 1;

                                     disposition = INPUT_PASS_TO_HANDLERS;

                            }

                            break;

                   }

                   break;

         case EV_KEY:

                   //判断按键值是否被支持

                   if (is_event_supported(code, dev->keybit, KEY_MAX) &&

                       !!test_bit(code, dev->key) != value) {

                            if (value != 2) {

                                     __change_bit(code, dev->key);

                                     if (value)

                                               input_start_autorepeat(dev, code);

                            }

                            disposition = INPUT_PASS_TO_HANDLERS;

                   }

                   break;

         case EV_SW:

                   if (is_event_supported(code, dev->swbit, SW_MAX) &&

                       !!test_bit(code, dev->sw) != value) {

                            __change_bit(code, dev->sw);

                            disposition = INPUT_PASS_TO_HANDLERS;

                   }

                   break;

         case EV_ABS:

                   if (is_event_supported(code, dev->absbit, ABS_MAX)) {

                            value = input_defuzz_abs_event(value,

                                               dev->abs[code], dev->absfuzz[code]);

                            if (dev->abs[code] != value) {

                                     dev->abs[code] = value;

                                     disposition = INPUT_PASS_TO_HANDLERS;

                            }

                   }

                   break;

         case EV_REL:

                   if (is_event_supported(code, dev->relbit, REL_MAX) && value)

                            disposition = INPUT_PASS_TO_HANDLERS;

                   break;

         case EV_MSC:

                   if (is_event_supported(code, dev->mscbit, MSC_MAX))

                            disposition = INPUT_PASS_TO_ALL;

                   break;

         case EV_LED:

                   if (is_event_supported(code, dev->ledbit, LED_MAX) &&

                       !!test_bit(code, dev->led) != value) {

                            __change_bit(code, dev->led);

                            disposition = INPUT_PASS_TO_ALL;

                   }

                   break;

         case EV_SND:

                   if (is_event_supported(code, dev->sndbit, SND_MAX)) {

                            if (!!test_bit(code, dev->snd) != !!value)

                                     __change_bit(code, dev->snd);

                            disposition = INPUT_PASS_TO_ALL;

                   }

                   break;

         case EV_REP:

                   if (code <= REP_MAX && value >= 0 && dev->rep[code] != value) {

                            dev->rep[code] = value;

                            disposition = INPUT_PASS_TO_ALL;

                   }

                   break;

         case EV_FF:

                   if (value >= 0)

                            disposition = INPUT_PASS_TO_ALL;

                   break;

         case EV_PWR:

                   disposition = INPUT_PASS_TO_ALL;

                   break;

         }

         if (type != EV_SYN)

                   dev->sync = 0;

         if ((disposition & INPUT_PASS_TO_DEVICE) && dev->event)

                   dev->event(dev, type, code, value);

         if (disposition & INPUT_PASS_TO_HANDLERS)

                   input_pass_event (dev, type, code, value);

}

在这里, 忽略掉具体事件的处理. 到最后,如果该事件需要input device来完成的,就会将disposition设置成INPUT_PASS_TO_DEVICE.如果需要handler来完成的,就将 dispostion设为INPUT_PASS_TO_HANDLERS.如果需要两者都参与,将disposition设置为 INPUT_PASS_TO_ALL.

需要输入设备参与的,回调设备的event函数.如果需要handler参与的.调用input_pass_event().代码如下:

static void input_pass_event(struct input_dev *dev, unsigned int type, unsigned int code, int value)

{

         struct input_handle *handle;

         rcu_read_lock();

         handle = rcu_dereference(dev->grab);

         if (handle)

                   handle->handler->event(handle, type, code, value);

         else

                   list_for_each_entry_rcu(handle, &dev->h_list, d_node)

                            if (handle->open)

                                     handle->handler->event(handle,

                                                                 type, code, value);

         rcu_read_unlock();

}

如果input device被强制指定了handler,则调用该handler的event函数.

结合handle注册的分析.我们知道.会将handle挂到input device的h_list链表上.

如果没有为input device强制指定handler.就会遍历input device->h_list上的handle成员.如果该handle被打开,则调用与输入设备对应的handler的event()函数.注意,只有在handle被打开的情况下才会接收到事件.

 

另外,输入设备的handler强制设置一般是用带EVIOCGRAB标志的ioctl来完成的.如下是发图的方示总结evnet的处理过程:

到此,已经分析了input device,handler和handle的注册过程以及事件的上报和处理.下面以evdev为实例做分析.来贯穿理解一下整个过程.

七:evdev概述

Evdev对应的设备节点一般位于/dev/input/event0 ~ /dev/input/event4.理论上可以对应32个设备节点.分别代表被handler匹配的32个input device.

 

可以用cat /dev/input/event0.然后移动鼠标或者键盘按键就会有数据输出(两者之间只能选一.因为一个设备文件只能关能一个输入设备).还可以往这个文件里写数据,使其产生特定的事件.这个过程之后再详细分析.

为了分析这一过程,必须从input子系统的初始化说起.

八:input子系统的初始化

Input子系统的初始化函数为input_init().代码如下:

static int __init input_init(void)

{

         int err;

         err = class_register(&input_class);

         if (err) {

                   printk(KERN_ERR "input: unable to register input_dev class\n");

                   return err;

         }

         err = input_proc_init();

         if (err)

                   goto fail1;

         err = register_chrdev(INPUT_MAJOR, "input", &input_fops);

         if (err) {

                   printk(KERN_ERR "input: unable to register char major %d", INPUT_MAJOR);

                   goto fail2;

         }

         return 0;

fail2:        input_proc_exit();

fail1:        class_unregister(&input_class);

         return err;

}

在这个初始化函数里,先注册了一个名为”input”的类.所有input device都属于这个类.在sysfs中表现就是.所有input device所代表的目录都位于/dev/class/input下面.

然后调用input_proc_init()在/proc下面建立相关的交互文件.

最后调用register_chrdev()注册了主设备号为INPUT_MAJOR(13).次设备号为0~255的字符设备.它的操作指针为input_fops.

这里可以看到.所有主设备号13的字符设备的操作最终都会转入到input_fops中.在前面分析的/dev/input/event0~/dev/input/event4的主设备号为13.操作也不例外的落在了input_fops中.

Input_fops定义如下:

static const struct file_operations input_fops = {

         .owner = THIS_MODULE,

         .open = input_open_file,

};

打开文件所对应的操作函数为input_open_file.代码如下示:

static int input_open_file(struct inode *inode, struct file *file)

{

         struct input_handler *handler = input_table[iminor(inode) >> 5];

         const struct file_operations *old_fops, *new_fops = NULL;

         int err;

         /* No load-on-demand here? */

         if (!handler || !(new_fops = fops_get(handler->fops)))

                   return -ENODEV;

iminor(inode)为打开文件所对应的次设备号.input_table是一个struct input_handler全局数组.先将设备结点的次设备号右移5位做为索引值到input_table中取对应项.这里可以看到.一 个handler代表1<<5个设备节点(因为在input_table中取值是以次备号右移5位为索引的.即低5位相同的次备号对应的是同一 个索引).终于看到了input_talbe大显身手的地方了.input_talbe[ ]中取值和input_talbe[ ]的赋值,这两个过程是相对应的.

在input_table中找到对应的handler之后,就会检验这个handler是否存,是否带有fops文件操作集.如果没有.则返回一个设备不存在的错误.

         /*

         * That's _really_ odd. Usually NULL ->open means "nothing special",

         * not "no device". Oh, well...

         */

         if (!new_fops->open) {

                   fops_put(new_fops);

                   return -ENODEV;

         }

         old_fops = file->f_op;

         file->f_op = new_fops;

         err = new_fops->open(inode, file);

         if (err) {

                   fops_put(file->f_op);

                   file->f_op = fops_get(old_fops);

         }

         fops_put(old_fops);

         return err;

}

然后将handler中的fops替换掉当前file的fops.如果handler的fops中有open()函数,则调用它.(如果以evdev为例的话,这里的open()函数应该就是evdev_open()函数)

九:evdev的初始化

Evdev的模块初始化函数为evdev_init().代码如下:

static int __init evdev_init(void)

{

         return input_register_handler(&evdev_handler);

}

它调用了input_register_handler注册了一个handler.

注意到,在这里evdev_handler中定义的minor为EVDEV_MINOR_BASE(64).也就是说evdev_handler所表示的设备文件范围为(13,64)~(13,64+32).

 

从之前的分析知道.匹配成功的关键在于handler中的blacklist和id_talbe. Evdev_handler的id_table定义如下:

static const struct input_device_id evdev_ids[] = {

         { .driver_info = 1 },     /* Matches all devices */

         { },                       /* Terminating zero entry */

};

它没有定义flags.也没有定义匹配属性值.这个handler是匹配所有input device的.匹配成功之后会调用handler->connect函数.

在Evdev_handler中,该成员函数如下所示:

static int evdev_connect(struct input_handler *handler, struct input_dev *dev, const struct input_device_id *id)

{

         struct evdev *evdev;

         int minor;

         int error;

         for (minor = 0; minor < EVDEV_MINORS; minor++)

                   if (!evdev_table[minor])

                            break;

         if (minor == EVDEV_MINORS) {

                   printk(KERN_ERR "evdev: no more free evdev devices\n");

                   return -ENFILE;

         }

EVDEV_MINORS定义为32.表示evdev_handler所表示的32个设备文件.evdev_talbe是一个struct evdev类型的数组.struct evdev是模块使用的封装结构.在接下来的代码中可以看到这个结构的使用.

这一段代码的在evdev_talbe找到为空的那一项.minor就是数组中第一项为空的序号.

         evdev = kzalloc(sizeof(struct evdev), GFP_KERNEL);

         if (!evdev)

                   return -ENOMEM;

         INIT_LIST_HEAD(&evdev->client_list);

         spin_lock_init(&evdev->client_lock);

         mutex_init(&evdev->mutex);

         init_waitqueue_head(&evdev->wait);

         snprintf(evdev->name, sizeof(evdev->name), "event%d", minor);

         evdev->exist = 1;

         evdev->minor = minor;

         evdev->handle.dev = input_get_device(dev);

         evdev->handle.name = evdev->name;

         evdev->handle.handler = handler;

         evdev->handle.private = evdev;

接下来,分配了一个evdev结构,并对这个结构进行初始化.这个结构封装了一个handle结构,这结构与之前所讨论的handler是不相同的.注意有一个字母的差别哦.可以把handle看成是handler和input device的信息集合体.在这个结构里集合了匹配成功的handler和input device

         strlcpy(evdev->dev.bus_id, evdev->name, sizeof(evdev->dev.bus_id));

         evdev->dev.devt = MKDEV(INPUT_MAJOR, EVDEV_MINOR_BASE + minor);

         evdev->dev.class = &input_class;

         evdev->dev.parent = &dev->dev;

         evdev->dev.release = evdev_free;

         device_initialize(&evdev->dev);

在这段代码里主要完成evdev封装的device的初始化.注意在这里,使它所属的类指向input_class.这样在/sysfs中创建的设备目录就会在/sys/class/input/下面显示.

         error = input_register_handle(&evdev->handle);

         if (error)

                   goto err_free_evdev;

         error = evdev_install_chrdev(evdev);

         if (error)

                   goto err_unregister_handle;

         error = device_add(&evdev->dev);

         if (error)

                   goto err_cleanup_evdev;

         return 0;

err_cleanup_evdev:

         evdev_cleanup(evdev);

err_unregister_handle:

         input_unregister_handle(&evdev->handle);

err_free_evdev:

         put_device(&evdev->dev);

         return error;

}

注册handle,如果成功,那么调用evdev_install_chrdev将evdev_table的minor项指向evdev. 然后将evdev->device注册到sysfs.如果失败,则进行相关的错误处理.

万事俱备了,但是要接收事件,还得要等”东风”.这个”东风”就是要打开相应的handle.这个打开过程是在文件的open()中完成的.

  • 1
    点赞
  • 2
    收藏
    觉得还不错? 一键收藏
  • 0
    评论
评论
添加红包

请填写红包祝福语或标题

红包个数最小为10个

红包金额最低5元

当前余额3.43前往充值 >
需支付:10.00
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值