linux系统查看ftp速率命令,请教：Linux下FTP命令拷贝资料速率问题？

MII-TOOL(8)                                                        MII-TOOL(8)

NAME

mii-tool - view, manipulate media-independent interface status

SYNOPSIS

mii-tool  [-v, --verbose] [-V, --version] [-R, --reset] [-r, --restart]

[-w,   --watch]   [-l,   --log]   [-A,   --advertise=media,...]    [-F,

--force=media] [interface ...]

DESCRIPTION

This  utility  checks or sets the status of a network interface s Media

Independent Interface (MII) unit.  Most fast ethernet adapters  use  an

MII to autonegotiate link speed and duplex setting.

Most  intelligent  network  devices  use an autonegotiation protocol to

communicate what media technologies they support, and then  select  the

fastest  mutually  supported  media  technology.  The -A or --advertise

options can be used to tell the MII to only advertise a subset  of  its

capabilities.   Some  passive  devices,  such as single-speed hubs, are

unable to autonegotiate.  To handle such devices, the MII protocol also

allows  for establishing a link by simply detecting either a 10baseT or

100baseT link beat.  The -F or --force options can be used to force the

MII  to operate in one mode, instead of autonegotiating.  The -A and -F

options are mutually exclusive.

The default short output reports the negotiated  link  speed  and  link

status for each interface.  If an interface or interfaces are not spec-

ified on the command line,  then  mii-tool  will  check  any  available

interfaces from eth0 through eth7.

OPTIONS

-v, --verbose

Display  more  detailed  MII status information.  If used twice,

also display raw MII register contents.

-V, --version

Display program version information.

-R, --reset

Reset the MII to its default configuration.

-r, --restart

Restart autonegotiation.

-w, --watch

Watch interface(s) and report changes in link status.   The  MII

interfaces are polled at one second intervals.

-l, --log

Used  with  -w,  records  link  status changes in the system log

instead of printing on standard output.

-F media, --force=media

Disable autonegotiation, and force the MII to either  100baseTx-

FD, 100baseTx-HD, 10baseT-FD, or 10baseT-HD operation.

-A media,..., --advertise=media,...

Enable and restart autonegotiation, and advertise only the spec-

ified media technologies.  Multiple technologies should be sepa-

rated  by  commas.   Valid  media  are  100baseT4, 100baseTx-FD,

100baseTx-HD, 10baseT-FD, and 10baseT-HD.

AUTHORS

David Hinds - dhinds@pcmcia.sourceforge.org

Donald Becker - becker@scyld.com

net-tools                     2000/04/25 22:58:19                  MII-TOOL(8)