/**
****************************************************
* File Name : main.c
* Description : Main program body
****************************************************
** This notice applies to any and all portions of this file
* that are not between comment pairs USER CODE BEGIN and
* USER CODE END. Other portions of this file, whether
* inserted by the user or by software development tools
* are owned by their respective copyright owners.
*
* COPYRIGHT(c) 2017 STMicroelectronics
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* 3. Neither the name of STMicroelectronics nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
****************************************************
*/
/* Includes ------------------------------------------------------------------*/
#include "main.h"
#include "STM32f1xx_hal.h"
#include "usart.h"
#include "gpio.h"
/* USER CODE BEGIN Includes */
#include "rtthread.h"
#include "string.h"
/* USER CODE END Includes */
/* Private variables ---------------------------------------------------------*/
/* USER CODE BEGIN PV */
/* Private variables ---------------------------------------------------------*/
/* USER CODE END PV */
/* Private function prototypes -----------------------------------------------*/
void SystemClock_Config(void);
/* USER CODE BEGIN PFP */
/* Private function prototypes -----------------------------------------------*/
/* USER CODE END PFP */
/* USER CODE BEGIN 0 */
//重映射串口1到rt_kprintf
void rt_hw_console_output(const char *str)
{
/* empty console output */
char aa='\r';
rt_enter_critical();
while(*str!='\0')
{
if(*str=='\n')
{
HAL_UART_Transmit(&huart1, (uint8_t *)&aa, 1, 10);
}
HAL_UART_Transmit(&huart1, (uint8_t *)(str++), 1, 10);
}
rt_exit_critical();
}
void rt_hw_us_delay(int us)
{
rt_uint32_t delta;
/* 获得延时经过的tick数 */
us = us * (SysTick->LOAD/(1000000/RT_TICK_PER_SECOND));
/* 获得当前时间 */
delta = SysTick->VAL;
/* 循环获得当前时间，直到达到指定的时间后退出循环 */
while (delta - SysTick->VAL< us);
}
void rt_hw_ms_delay(int ms)
{
int i=0,j=0;
for(j=0;j
{
for (i=0;i<2;i++)
rt_hw_us_delay(500);
}
}
uint32_t rt_hw_delay_Init(void)
{
#if !defined(STM32F0xx)
uint32_t c;
/* Enable TRC */
CoreDebug->DEMCR &= ~0x01000000;
CoreDebug->DEMCR |= 0x01000000;
/* Enable counter */
DWT->CTRL &= ~0x00000001;
DWT->CTRL |= 0x00000001;
/* Reset counter */
DWT->CYCCNT = 0;
/* Check if DWT has started */
c = DWT->CYCCNT;
/* 2 dummys */
__ASM volatile ("NOP");
__ASM volatile ("NOP");
/* Return difference, if result is zero, DWT has not started */
return (DWT->CYCCNT - c);
#else
/* Return OK */
return 1;
#endif
}
void rt_hw_delay_us(__IO uint32_t micros)
{
#if !defined(STM32F0xx)
uint32_t start = DWT->CYCCNT;
/* Go to number of cycles for system */
micros *= (HAL_RCC_GetHCLKFreq() / 1000000);
/* Delay till end */
while ((DWT->CYCCNT - start) < micros);
#else
/* Go to clock cycles */
micros *= (SystemCoreClock / 1000000) / 5;
/* Wait till done */
while (micros--);
#endif
}
void rt_hw_delay_ms(__IO uint32_t mills)
{
rt_hw_delay_us(1000*mills);
}
/*
* 程序清单：消息队列例程
*
* 这个程序会创建3个动态线程：
* 一个线程会从消息队列中收取消息；
* 一个线程会定时给消息队列发送消息；
* 一个线程会定时给消息队列发送紧急消息。
*/
/* 指向线程控制块的指针 */
static rt_thread_t tid1 = RT_NULL;
static rt_thread_t tid2 = RT_NULL;
static rt_thread_t tid3 = RT_NULL;
/* 消息队列控制块 */
static struct rt_messagequeue mq;
/* 消息队列中用到的放置消息的内存池 */
static char msg_pool[2048];
/* 线程1入口函数 */
static void thread1_entry(void* parameter)
{
char buf[128];
while (1)
{
rt_memset(&buf[0], 0, sizeof(buf));
/* 从消息队列中接收消息 */
if (rt_mq_recv(&mq, &buf[0], sizeof(buf), RT_WAITING_FOREVER)
== RT_EOK)
{
/* 输出内容 */
rt_kprintf("thread1: recv a msg, the content:%s\n", buf);
}
/* 延迟10个OS Tick */
rt_thread_delay(10);
}
}
/* 线程2入口函数 */
static void thread2_entry(void* parameter)
{
int i, result;
char buf[] = "this is message No.x";
while (1)
{
for (i = 0; i < 10; i++)
{
buf[sizeof(buf) - 2] = '0' + i;
rt_kprintf("thread2: send message - %s\n", buf);
/* 发送消息到消息队列中 */
result = rt_mq_send(&mq, &buf[0], sizeof(buf));
if ( result == -RT_EFULL)
{
/* 消息队列满， 延迟1s时间 */
rt_kprintf("message queue full, delay 1s\n");
rt_thread_delay(100);
}
}
/* 延时10个OS Tick */
rt_thread_delay(10);
}
}
/* 线程3入口函数 */
static void thread3_entry(void* parameter)
{
char buf[] = "this is an urgent message!";
while (1)
{
rt_kprintf("thread3: send an urgent message\n");
/* 发送紧急消息到消息队列中 */
rt_mq_urgent(&mq, &buf[0], sizeof(buf));
/* 延时25个OS Tick */
rt_thread_delay(25);
}
}
#define THREAD_STACK_SIZE 512
#define THREAD_PRIORITY 3
#define THREAD_TIMESLICE 20
/* USER CODE END 0 */
int main(void)
{
/* USER CODE BEGIN 1 */
/* USER CODE END 1 */
/* MCU Configuration----------------------------------------------------------*/
// /* Reset of all peripherals, Initializes the Flash interface and the Systick. */
// HAL_Init();
// /* USER CODE BEGIN Init */
// /* USER CODE END Init */
// /* Configure the system clock */
// SystemClock_Config();
// /* USER CODE BEGIN SysInit */
// /* USER CODE END SysInit */
// /* Initialize all configured peripherals */
// MX_GPIO_Init();
// MX_USART1_UART_Init();
/* USER CODE BEGIN 2 */
/* 初始化消息队列 */
rt_mq_init(&mq, "mqt",
&msg_pool[0], /* 内存池指向msg_pool */
128 - sizeof(void*), /* 每个消息的大小是 128 - void* */
sizeof(msg_pool), /* 内存池的大小是msg_pool的大小 */
RT_IPC_FLAG_FIFO); /* 如果有多个线程等待，按照FIFO的方法分配消息 */
/* 创建线程1 */
tid1 = rt_thread_create("t1",
thread1_entry, /* 线程入口是thread1_entry */
RT_NULL, /* 入口参数是RT_NULL */
THREAD_STACK_SIZE, THREAD_PRIORITY, THREAD_TIMESLICE);
if (tid1 != RT_NULL)
rt_thread_startup(tid1);
/* 创建线程2 */
tid2 = rt_thread_create("t2",
thread2_entry, /* 线程入口是thread2_entry */
RT_NULL, /* 入口参数是RT_NULL */
THREAD_STACK_SIZE, THREAD_PRIORITY, THREAD_TIMESLICE);
if (tid2 != RT_NULL)
rt_thread_startup(tid2);
/* 创建线程3 */
tid3 = rt_thread_create("t3",
thread3_entry, /* 线程入口是thread3_entry */
RT_NULL, /* 入口参数是RT_NULL */
THREAD_STACK_SIZE, THREAD_PRIORITY, THREAD_TIMESLICE);
if (tid3 != RT_NULL)
rt_thread_startup(tid3);
rt_hw_delay_Init();
printf("\r\n机智云 只为智能硬件而生\r\n");
printf("Gizwits Smart Cloud for Smart Products\r\n");
printf("链接|增值|开放|中立|安全|自有|自由|生态\r\n");
printf("www.gizwits.com\r\n");
printf("\r\nGokit RT-Thread Demo\r\n\r\n");
return 0;
/* USER CODE END 2 */
/* Infinite loop */
/* USER CODE BEGIN WHILE */
// while (1)
// {
/* USER CODE END WHILE */
/* USER CODE BEGIN 3 */
//
// }
/* USER CODE END 3 */
}
/** System Clock Configuration
*/
void SystemClock_Config(void)
{
RCC_OscInitTypeDef RCC_OscInitStruct;
RCC_ClkInitTypeDef RCC_ClkInitStruct;
/**Initializes the CPU, AHB and APB busses clocks
*/
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE;
RCC_OscInitStruct.HSEState = RCC_HSE_ON;
RCC_OscInitStruct.HSEPredivValue = RCC_HSE_PREDIV_DIV1;
RCC_OscInitStruct.HSIState = RCC_HSI_ON;
RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE;
RCC_OscInitStruct.PLL.PLLMUL = RCC_PLL_MUL9;
if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK)
{
_Error_Handler(__FILE__, __LINE__);
}
/**Initializes the CPU, AHB and APB busses clocks
*/
RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK|RCC_CLOCKTYPE_SYSCLK
|RCC_CLOCKTYPE_PCLK1|RCC_CLOCKTYPE_PCLK2;
RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK;
RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1;
RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV2;
RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1;
if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_2) != HAL_OK)
{
_Error_Handler(__FILE__, __LINE__);
}
/**Configure the Systick interrupt time
*/
HAL_SYSTICK_Config(HAL_RCC_GetHCLKFreq()/1000);
/**Configure the Systick
*/
HAL_SYSTICK_CLKSourceConfig(SYSTICK_CLKSOURCE_HCLK);
/* SysTick_IRQn interrupt configuration */
HAL_NVIC_SetPriority(SysTick_IRQn, 0, 0);
}
/* USER CODE BEGIN 4 */
/* USER CODE END 4 */
/**
* @brief This function is executed in case of error occurrence.
* @param None
* @retval None
*/
void _Error_Handler(char * file, int line)
{
/* USER CODE BEGIN Error_Handler_Debug */
/* User can add his own implementation to report the HAL error return state */
while(1)
{
}
/* USER CODE END Error_Handler_Debug */
}
#ifdef USE_FULL_ASSERT
/**
* @brief Reports the name of the source file and the source line number
* where the assert_param error has occurred.
* @param file: pointer to the source file name
* @param line: assert_param error line source number
* @retval None
*/
void assert_failed(uint8_t* file, uint32_t line)
{
/* USER CODE BEGIN 6 */
/* User can add his own implementation to report the file name and line number,
ex: printf("Wrong parameters value: file %s on line %d\r\n", file, line) */
/* USER CODE END 6 */
}
#endif
/**
* @}
*/
/**
* @}
*/
/**************** (C) COPYRIGHT STMicroelectronics ****END OF FILE***/
扫一扫
1627
被折叠的 条评论
为什么被折叠?
到【灌水乐园】发言
