php cgi配置日志,php-fpm配置笔记

php-fpm配置不当，导致服务器经常出现502错误，上个学期多次调整都没有解决，网上找来资料，大都是增加max_children，可是我都加到顶了，php-fpm log里面还是有大量的警告:eems busy (you may need to increase pm.start_servers, or pm.min/max_spare_servers), spawning 16 children, there are 0 idle, and 88 total children

不想看英文,一看就头晕,但是502更头晕,特别是昨天,刚重启了lnmp没多久，容不得松口气，就看到负载飙到20多，一开网站，又特么502了。

硬着头皮看默认配置里面的英文注释，才发现自己的三个参数配置貌似有相当大的问题：Choose how the process manager will control the number of child processes.

; Possible Values:

;   static  - a fixed number (pm.max_children) of child processes;

;   dynamic - the number of child processes are set dynamically based on the

;             following directives. With this process management, there will be

;             always at least 1 children.

;             pm.max_children      - the maximum number of children that can

;                                    be alive at the same time.

;             pm.start_servers     - the number of children created on startup.

;             pm.min_spare_servers - the minimum number of children in 'idle'

;                                    state (waiting to process). If the number

;                                    of 'idle' processes is less than this

;                                    number then some children will be created.

;             pm.max_spare_servers - the maximum number of children in 'idle'

;                                    state (waiting to process). If the number

;                                    of 'idle' processes is greater than this

;                                    number then some children will be killed.

;  ondemand - no children are created at startup. Children will be forked when

;             new requests will connect. The following parameter are used:

;             pm.max_children           - the maximum number of children that

;                                         can be alive at the same time.

;             pm.process_idle_timeout   - The number of seconds after which

;                                         an idle process will be killed.

; Note: This value is mandatory.

; The number of child processes to be created when pm is set to 'static' and the

; maximum number of child processes when pm is set to 'dynamic' or 'ondemand'.

; This value sets the limit on the number of simultaneous requests that will be

; served. Equivalent to the ApacheMaxClients directive with mpm_prefork.

; Equivalent to the PHP_FCGI_CHILDREN environment variable in the original PHP

; CGI. The below defaults are based on a server without much resources. Don't

; forget to tweak pm.* to fit your needs.

; Note: Used when pm is set to 'static', 'dynamic' or 'ondemand'

; Note: This value is mandatory.

pm.max_children = 5

; The number of child processes created on startup.

; Note: Used only when pm is set to 'dynamic'

; Default Value: min_spare_servers + (max_spare_servers - min_spare_servers) / 2

pm.start_servers = 2

; The desired minimum number of idle server processes.

; Note: Used only when pm is set to 'dynamic'

; Note: Mandatory when pm is set to 'dynamic'

pm.min_spare_servers = 1

; The desired maximum number of idle server processes.

; Note: Used only when pm is set to 'dynamic'

; Note: Mandatory when pm is set to 'dynamic'

pm.max_spare_servers = 3

注释上貌似是说,static模式时,只有pm.max_children生效，dynamic模式时,pm.max_children依然生效，另外:pm.start_server  #控制服务启动时创建的进程数,

pm.min_spare_servers  #控制最小备用进程数

pm.max_spare_servers  #最大备用进程数

spare_servers翻译成备用进程，不知道合适不适合，如果真这样，那我之前的配置就让人无奈了: pm.min_space_servers 20,pm.max_spare_servers 80，pm.max_children 80，会不会是因为备用的太多才导致502呢？

另外，下面的具体配置里面，注释中给出了计算pm.start_servers默认值的公式：Default Value: min_spare_servers + (max_spare_servers - min_spare_servers) / 2

按这个公式,我之前的pm.start_servers应该是 20+(80-20)/2=50，可是我当时设置的是20…

重新规划如下:pm = dynamic

pm.max_children =80     备：我的值为360

pm.start_servers = 12       我设为了190

pm.min_spare_servers = 4    我设80

pm.max_spare_servers = 20   我设300

rlimit_files = 65535

pm.max_requests = 102400

貌似要好点了,内存使用不像之前那么夸张了:

================================>

在  /etc/sysctl.conf 最末增加了一行：

#add by kevin at 201505172115

fs.file-max=65536

============== 调优及排错部份====================》》

三05

我的网站运行环境是Nginx +php fastcgi模式的。这几天运行一直不稳定，总是出错，报502错误。

今天跟以前的同事请教了一下，他告诉我检查一下php-fpm的日志，那里记录了很多有用的信息。

于是我检查了一下，发现确实有很多报错信息：

Mar 01 14:40:01.922284 [NOTICE] fpm_got_signal(), line 48: received SIGCHLD

Mar 01 14:40:01.922343 [NOTICE] fpm_children_bury(), line 215: child 12057 (pool default) exited with code 0 after 170.403416 seconds from start

Mar 01 14:42:12.839544 [NOTICE] fpm_children_make(), line 352: child 12962 (pool default) started

Mar 01 14:42:16.817386 [NOTICE] fpm_got_signal(), line 48: received SIGCHLD

Mar 01 14:42:16.817449 [NOTICE] fpm_children_bury(), line 215: child 12385 (pool default) exited

[root@localhost logs]# tail -50 /www/wdlinux/php/logs/php-fpm.log

Mar 05 13:11:55.321376 [NOTICE] fpm_children_make(), line 352: child 10657 (pool default) started

有的报错信息，就好说了，直接上网查信息。

经过搜索，最后总结出以下几条优化策略：

1、提升服务器的文件句柄打开打开

# vi /etc/security/limits.conf 加上

* soft nofile 65500

* hard nofile 65500

2、提升nginx的进程文件打开数

nginx.conf : worker_rlimit_nofile 51200;

3、修改php-fpm.conf文件，主要需要修改2处。

命令 ulimit -n 查看限制的打开文件数，php-fpm.conf 中的选项rlimit_files 确保和此数值一致。

10240

65500

4、

# vi /etc/sysctl.conf

底部添加

fs.file-max=65500

后 sysctl -p 生效。

经过以上修改，重启PHP。

到目前为止还没有出现过以上的报错信息。一切运行正常。