viper4android设置使用手册(Viper4android settings manual)
This setup manual follows the version update for the ViPER4Android v2.x version.
The latest version of FX v2.2.0.1, XHiFi v2.0.0.5
[FX version settings]
V4A FX version mainly for audio effects rendering, by adjusting the parameters to achieve the purpose of audio frequency adjustment.
< headphone effects >
1 、 effect master switch. This option defines whether to enable V4A headphone sound, and is the master switch.
2, playback gain control
Playback gain control is used primarily to dynamically control audio volume, amplification, or attenuation.
(1) enabled. Do you want to enable this effect?.
(2) effect strength. The effect intensity represents the volume amplification or attenuation speed, the stronger the faster, the final volume is greater, the weaker the slower, and eventually the volume closer to the original audio volume. Medium recommended.
(3) maximum gain multiples. When the volume of the audio is over, the playback gain may have a very large magnification in order to enlarge the volume to the set level. The bigger the value, the larger the volume, and the noise in the song will be magnified when it's too large. Recommend 4 times.
(4) maximum volume. This value defines the maximum volume decibel value of the sound produced from the playback gain. The greater the volume, the greater the volume, and the 0 dB represents the maximum value of the digital signal. To make the sound softer, recommend -1.9 decibels.
3, FIR equalizer
10 stage 511 order FIR linear equalizer.
(1) enabled. Do you want to enable this effect?.
(2) choosing preset. Here you can choose some of the preset equalizer effects in your program. When you select custom, you will manually adjust the settings of the graphics equalizer.
(3) graphics equalizer manual adjustment. When you touch the graphics equalizer, you will pop up the balanced interface of the graphics. You can customize the attenuation of the gain of the 10 bands respectively.
4, p