linux bridge 不工作,linux – Bridge无法正常工作

我们希望通过eth0和eth1接口在我们的主板上创建桥(mybridge).该板运行 Linux 2.6.34.9.

以下是命令：

brctl addbr mybridge

ifconfig eth1 0.0.0.0

ifconfig eth0 0.0.0.0

brctl addif mybridge eth1

brctl addif mybridge eth0

ifconfig mybridge up

PC —– —– ETH1 ——- mybridge ETH0

当我们从PC上ping电路板时,我们能够在eth1(eth1 rx计数器增加)上接收数据包,但它们没有被转移到mybridge,因为mybridge上的rx计数器没有增加.

经过网上搜索后我们发现了

mybridge已启动但未进入RUNNING模式.除非它进入RUNNING模式,否则桥将无法工作.

谁能告诉我们为什么mybridge没有进入RUNNING状态？

/ # ifconfig

eth0 Link encap:Ethernet HWaddr BC:9A:78:56:34:12

UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1

RX packets:0 errors:0 dropped:0 overruns:0 frame:0

TX packets:0 errors:0 dropped:0 overruns:0 carrier:0

collisions:0 txqueuelen:1000

RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)

eth1 Link encap:Ethernet HWaddr 00:E0:0C:BC:E0:00

UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1

RX packets:101 errors:0 dropped:0 overruns:0 frame:0

TX packets:3 errors:0 dropped:0 overruns:0 carrier:0

collisions:0 txqueuelen:1000

RX bytes:7200 (7.0 KiB) TX bytes:126 (126.0 B)

lo Link encap:Local Loopback

inet addr:127.0.0.1 Mask:255.0.0.0

UP LOOPBACK RUNNING MTU:16436 Metric:1

RX packets:0 errors:0 dropped:0 overruns:0 frame:0

TX packets:0 errors:0 dropped:0 overruns:0 carrier:0

collisions:0 txqueuelen:0

RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)

mybridge Link encap:Ethernet HWaddr 00:E0:0C:BC:E0:00

UP BROADCAST MULTICAST MTU:1500 Metric:1

RX packets:0 errors:0 dropped:0 overruns:0 frame:0

TX packets:0 errors:0 dropped:0 overruns:0 carrier:0

collisions:0 txqueuelen:0

RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)

任何形式的输入都会有很大的帮助.