本文详细介绍了如何在Linux系统上使用Roon Optimized Core Kit (ROCK) 设置音乐播放解决方案。首先，准备NUC硬件，包括安装SSD和RAM，然后更新BIOS。接着，下载ROCK的工厂重置镜像，并使用Etcher将其写入USB闪存驱动器。将USB插入NUC，通过BIOS设置从USB启动进行安装。安装完成后，安装必要的Codecs并确保ROCK为最新版本。最后，通过Roon Remote连接并开始使用。
Roon Optimized Core Kit (ROCK) comes with a “factory reset” disk image, that is meant to be flashed onto a USB flash drive. When the device is booted from this USB flash drive, it will partition, format, and initialize your SSD.1. Prepare your NUC's hardwareInstall a 64GB or larger SSD into the M.2 Slot
Install 4GB or more of RAM
Optionally, install a 2.5" internal SATA disk. You can only use 1, so don't bother with more.For more information about storage options for use with ROCK, see here
Plug in a monitor and keyboard. Mouse can be helpful configuring your BIOS, but it is not required.
At this point, there's no operating system on the NUC, but it should boot and you should see the Intel welcome/splash screen. Note that this screen should also have the correct keyboard shortcuts for entering BIOS which you'll need in Step 2.
Before moving forward, note that you will also need:An existi
最低0.47元/天 解锁文章
865
被折叠的 条评论
为什么被折叠?
到【灌水乐园】发言
