linux取消raid 1,linux – 软件RAID1准备失败 – 如何手动降级？

我在生产中有一台Centos 5.4服务器,软件RAID1中有2个驱动器.

最后几天/ var / log / messages有很多消息,表明其中一个驱动器已准备好失败：

Sep 23 00:48:38 milkyway kernel: SCSI device sda: 1465149168 512-byte hdwr sectors (750156 MB)

Sep 23 00:48:39 milkyway kernel: ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0

Sep 23 00:48:39 milkyway kernel: ata1.00: irq_stat 0x40000001

Sep 23 00:48:39 milkyway kernel: ata1.00: cmd 25/00:10:31:21:8c/00:00:28:00:00/e0 tag 0 dma 8192 in

Sep 23 00:48:40 milkyway kernel: res 51/40:00:35:21:8c/00:00:28:00:00/e0 Emask 0x9 (media error)

Sep 23 00:48:40 milkyway kernel: ata1.00: status: { DRDY ERR }

Sep 23 00:48:40 milkyway kernel: ata1.00: error: { UNC }

Sep 23 00:48:40 milkyway kernel: ata1.00: configured for UDMA/133

Sep 23 00:48:40 milkyway kernel: ata1: EH complete

Sep 23 00:48:41 milkyway kernel: sda: Write Protect is off

Sep 23 00:48:41 milkyway kernel: ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0

Sep 23 00:48:58 milkyway kernel: ata1.00: irq_stat 0x40000001

Sep 23 00:49:00 milkyway kernel: ata1.00: cmd 25/00:10:31:21:8c/00:00:28:00:00/e0 tag 0 dma 8192 in

Sep 23 00:49:03 milkyway kernel: res 51/40:00:35:21:8c/00:00:28:00:00/e0 Emask 0x9 (media error)

Sep 23 00:49:03 milkyway kernel: ata1.00: status: { DRDY ERR }

Sep 23 00:49:04 milkyway kernel: ata1.00: error: { UNC }

Sep 23 00:49:04 milkyway kernel: ata1.00: configured for UDMA/133

Sep 23 00:49:04 milkyway kernel: ata1: EH complete

Sep 23 00:49:04 milkyway kernel: ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0

Sep 23 00:49:04 milkyway kernel: ata1.00: irq_stat 0x40000001

Sep 23 00:49:04 milkyway kernel: ata1.00: cmd 25/00:10:31:21:8c/00:00:28:00:00/e0 tag 0 dma 8192 in

Sep 23 00:49:04 milkyway kernel: res 51/40:00:35:21:8c/00:00:28:00:00/e0 Emask 0x9 (media error)

Sep 23 00:49:04 milkyway kernel: ata1.00: status: { DRDY ERR }

Sep 23 00:49:04 milkyway kernel: ata1.00: error: { UNC }

Sep 23 00:49:04 milkyway kernel: ata1.00: configured for UDMA/133

Sep 23 00:49:05 milkyway kernel: ata1: EH complete

Sep 23 00:49:05 milkyway kernel: SCSI device sda: drive cache: write back

Sep 23 00:49:06 milkyway kernel: ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0

Sep 23 00:49:06 milkyway kernel: ata1.00: irq_stat 0x40000001

Sep 23 00:49:06 milkyway kernel: ata1.00: cmd 25/00:10:31:21:8c/00:00:28:00:00/e0 tag 0 dma 8192 in

Sep 23 00:49:06 milkyway kernel: res 51/40:00:35:21:8c/00:00:28:00:00/e0 Emask 0x9 (media error)

Sep 23 00:49:06 milkyway kernel: ata1.00: status: { DRDY ERR }

Sep 23 00:49:06 milkyway kernel: ata1.00: error: { UNC }

Sep 23 00:49:06 milkyway kernel: ata1.00: configured for UDMA/133

Sep 23 00:49:08 milkyway kernel: sd 0:0:0:0: SCSI error: return code = 0x08000002

但是在/ proc / mdstat中没有任何硬盘显示为降级：

Personalities : [raid1] [raid10] [raid0] [raid6] [raid5] [raid4]

md0 : active raid1 sdb1[1] sda1[0]

4200896 blocks [2/2] [UU]

md1 : active raid1 sdb2[1] sda2[0]

2104448 blocks [2/2] [UU]

md2 : active raid1 sdb3[1] sda3[0]

726266432 blocks [2/2] [UU]

unused devices:

我已经开始将所有数据迁移到新服务器.但结果是,由于硬盘发生故障,现在这很慢,几乎不可能将它们全部转移.此外,由于硬盘瓶颈负载天空火箭,导致服务器无法使用.

是否可以在不丢失数据且没有任何停机的情况下删除故障驱动器？即使RAID1暂时保留1个驱动器,我也不介意,以便尽快完成传输而不会延迟.