在介绍一中简单介绍了pytest的安装和简单使用,接下来我们就要实际了解pytest了
一、pytest的用例发现规则
pytest可以在不同的函数、包中发现用例,发现的规则如下
文件名以test_开头的py文件
以test_开头的函数
以Test开头的类
以test_开头的方法(与2类似)
要注意的是所有的包必须要有init.py文件(在使用各种编辑器时会自动生成)
二、pytest运行方式
1、单独执行某一个py文件里所有的用例
pytest test_mod.py
2、执行目录下所有的用例
pytest testing/
会按发现规则执行该目录下符合的用例
3、单独执行某一个用例
以函数形式的用例
pytest test_mod.py::testfunc
以类形式的用例
pytest testmod.py::testclass::test_method
三、pytest的测试框架(fixture)模式---xUnit格式
pytest支持以xUnit格式型的测试模型(setup/teardown),但还与python自带的unittest还是有一点差别,如下
模块形式----使用setup_module/teardown_module
函数形式----使用setup_function/teardown_function
类形式----使用setup_class/teardown_class
方法形式---使用setup_method/teardown_method
说了还是不好理解,我们还是通过例子还呈现
1、pytest以函数形式形成测试用例
from __future__ importprint_functiondefsetup_module(module):print('\nsetup_module()')defteardown_module(module):print('teardown_module()')defsetup_function(function):print('\nsetup_function()')defteardown_function(function):print('\nteardown_function()')deftest_1():print('- test_1()')deftest_2():print('- test_2()')
运行结果如下:
通过结果可以看出,各顺序如下
setup_module()----->setup_function()----->test_1----->teardown_function()----->setup_function()----->test_2--->teardown_function()---->teardown_module()
setup_module()和teardown_module只会在开始测试及测试结束时各运行一次
而setup_function()和teardwon_function会在每个用例开始前及结束后各运行一次
2、pytest以类形式的测试用例
from __future__ importprint_functionclassTestClass:
@classmethoddefsetup_class(cls):print ('\nsetup_class()')
@classmethoddefteardown_class(cls):print ('teardown_class()')defsetup_method(self, method):print ('\nsetup_method()')defteardown_method(self, method):print ('\nteardown_method()')deftest_3(self):print('- test_3()')deftest_4(self):print('- test_4()')
运行结果如下
从结果可以看出,类形式的执行顺序如下
setup_class()--->setup_method()---->test_3()---->teardown_method()--->setup_mothod()-->test_4()---->teardown_method()---->teardonw_class()
setup_class和teardown_class只会在类调用前及结束后各运行一次
setup_method和teardown_method会在每个用例时都会运行
以类形式运行时,类里的用例执行顺序是不会变的,这点比unittest好
3、运行unittest框架模式
pytest也可以直接运行unittest模式的测试用例,如下
classmy(unittest.TestCase):defdelf(self,a):printa
@classmethoddefset_resource(self):
bb='setUpclass'
printbb
@classmethoddefsetUpClass(cls):print "setUpclass"cls.set_resource()defsetUp(self):print "setUp"floating_ip= ('setUptoTearDwon',)
self.addCleanup(self.delf,
floating_ip[0])deftest_1(self):'''i dont konw'''a='1111'
print "test_1"floating_ip= ('bbbbb',)
self.addCleanup(self.delf,
floating_ip[0])print "2222"self.addCleanup(self.delf,
a)deftearDown(self):print 'this is tearDown'
deftest_2(self):print "test_2"@classmethoddeftearDownClass(cls):print "teardown...."
使用pytest运行该文件,结果如下
collected 2items
unittest_fomater.py ..========================== 2 passed in 0.19 seconds ===========================
可以看出,pytest也支持unittest的addCleanup功能等
需要注意的是,如果你在pytest模式中使用setupClass()函数是不行的,不会识别,但如果用例类继承之unittest.Testcase,还是可以识别的
classTestClass:
@classmethoddef setUpClass(cls):print ('\nsetup_class()')
@classmethoddefteardown_class(cls):print ('teardown_class()')def setup(self):print ('\nsetup_method()')defteardown_method(self, method):print ('\nteardown_method()')deftest_3(self):print('- test_3()')deftest_4(self):print('- test_4()')
用pytest运行时,结果如下,没有识别到setUpclass
collected 2items
pytest_lean1.py::TestClass::test_3
setup_method()-test_3()
PASSED
teardown_method()
pytest_lean1.py::TestClass::test_4
setup_method()-test_4()
PASSED
teardown_method()
teardown_class()