218G 数据 ,14个进程并行拷贝,16G ./c-routing-engine
1.9G ./expr
14G ./guide
24G ./offline
3.0G ./rank
8.9G ./rws
2.9G ./ra
22G ./re00
14G ./re01
22G ./re1
9.3G ./re2
14G ./re3
26G ./re4
29G ./re5
17G ./rec1ios
SSD :耗时15minsexpress
普通磁盘:29mins bash
最近有需求是从网络磁盘想本地拷贝数据,而后运行程序,完后再将数据从本地拷贝到网磁盘,因为数据可能有几十 G 至 200G 左右,因此想观察一下系统瓶颈在哪?网络
相关指令:app
首先 、用top命令查看ide
top - 11:53:16 up 1 day, 19:10, 2 users, load average: 1.20, 2.92, 3.55
Tasks: 930 total, 2 running, 927 sleeping, 1 stopped, 0 zombie
Cpu(s): 2.6%us, 0.2%sy, 0.0%ni, 97.2%id, 0.1%wa, 0.0%hi, 0.0%si, 0.0%st
Mem: 132044872k total, 125619664k used, 6425208k free, 1252580k buffers
Swap: 0k total, 0k used, 0k free, 41233480k cached
查看12.6% wa,IO等待所占用的CPU时间的百分比,若是高过30%时IO压力高;post
其次、 用iostat -x 1 10ui
若是 iostat 没有,要 yum install sysstatthis
map@~~~~~/$ iostat
Linux 2.6.32_1-18-0-0 (<>.com) 08/19/2016 _x86_64_ (40 CPU)
avg-cpu: %user %nice %system %iowait %steal %idle
2.14 0.06 0.69 1.30 0.00 95.82
Device: tps Blk_read/s Blk_wrtn/s Blk_read Blk_wrtn
sda 59.14 8499.04 17870.40 1321789708 2779243760
sdb 2.22 0.47 1537.57 72498 239126000
sdc 2.45 0.15 1599.44 23082 248747664
sdd 2.49 3.52 1721.23 547042 267689592
sde 0.02 0.13 1.80 20098 279287
sdf 0.02 0.13 1.80 20098 279287
iostat - Report Central Processing Unit (CPU) statistics and input/output statistics for devices, partitions and network filesystems (NFS).spa
CPU Utilization Report
The first report generated by the iostat command is the CPU Utilization Report. For multiprocessor systems, the CPU values are global averages among all processors. The report has the following format:
%user Show the percentage of CPU utilization that occurred while executing at the user level (application).
%nice Show the percentage of CPU utilization that occurred while executing at the user level with nice priority.
%system Show the percentage of CPU utilization that occurred while executing at the system level (kernel).
%iowait Show the percentage of time that the CPU or CPUs were idle during which the system had an outstanding disk I/O request.
%steal Show the percentage of time spent in involuntary wait by the virtual CPU or CPUs while the hypervisor was servicing another virtual processor.
%idle Show the percentage of time that the CPU or CPUs were idle and the system did not have an outstanding disk I/O request.
Device Utilization Report
Device: tps Blk_read/s Blk_wrtn/s Blk_read Blk_wrtn
sda 59.14 8499.04 17870.40 1321789708 2779243760
tps:Indicate the number of transfers per second that were issued to the device. A transfer is an I/O request to the device. Multiple logical requests can be combined into a single I/O request to the device. A transfer is of indeterminate size.
Blk_read/s、Blk_wrtn/s :Indicate the amount of data read from the device expressed in a number of blocks per second. Blocks are equivalent to sectors with kernels 2.4 and later and therefore have a size of 512 bytes. With older kernels, a block is of indeterminate size.
Blk_rea、Blk_wrtn:The total number of blocks read.
rrqm/s:The number of read requests merged per second that were queued to the device.
r/s、w/s:The number of read requests that were issued to the device per second.
avgrq-sz:The average size (in sectors) of the requests that were issued to the device.
avgqu-sz:The average queue length of the requests that were issued to the device.
await:The average time (in milliseconds毫秒) for I/O requests issued to the device to be served. This includes the time spent by the requests in queue and the time spent servicing them.
svctm:The average service time (in milliseconds) for I/O requests that were issued to the device. Warning! Do not trust this field any more. This field will be removed in a future sysstat version.
%util:Percentage of CPU time during which I/O requests were issued to the device (bandwidth utilization for the device). Device saturation occurs when this value is close to 100%.
Network Filesystem report
OPTIONS
-c Display the CPU utilization report.
-d Display the device utilization report.
-h Make the NFS report displayed by option -n easier to read by a human.
-k Display statistics in kilobytes per second instead of blocks per second. Data displayed are valid only with kernels 2.4 and later.
-m Display statistics in megabytes per second instead of blocks or kilobytes per second. Data displayed are valid only with kernels 2.4 and later.
-N Display the registered device mapper names for any device mapper devices. Useful for viewing LVM2 statistics.
-n Display the network filesystem (NFS) report. This option works only with kernel 2.6.17 and later.
-p [ { device [,...] | ALL } ]
The -p option displays statistics for block devices and all their partitions that are used by the system. If a device name is entered on the command line, then statistics for it and all its partitions are displayed. Last, the ALL keyword indicates that statistics have to be displayed for all the block devices and partitions defined by the system, including those that have never been used. Note that this option works only with post 2.5 kernels.
-t Print the time for each report displayed. The timestamp format may depend on the value of the S_TIME_FORMAT environment variable (see below).
-V Print version number then exit.
-x Display extended statistics. This option works with post 2.5 kernels since it needs /proc/diskstats file or a mounted sysfs to get the statistics. This option may also work with older kernels (e.g. 2.4) only if extended statistics are available in /proc/partitions (the kernel needs to be patched for that).
-z Tell iostat to omit output for any devices for which there was no activity during the sample period.
iostat
Display a single history since boot report for all CPU and Devices.
iostat -d 2
Display a continuous device report at two second intervals.
iostat -d 2 6
Display six reports at two second intervals for all devices.
iostat -x hda hdb 2 6
Display six reports of extended statistics at two second intervals for devices hda and hdb.
iostat -p sda 2 6
Display six reports at two second intervals for device sda and all its partitions (sda1, etc.)