目录
Practice1 (4)
一编译过程 (4)
1 安装必要的软件 (4)
2 下载linux内核源文件 (4)
3 解压缩源文件 (5)
4 复制config文件 (6)
5 进行menucofig配置 (6)
6 menuconfig配置页面 (7)
7 对驱动设置进行简单配置 (8)
8 选择cpu类型 (8)
9 设置完成保存退出 (9)
10 开始编译内核 (9)
11 内核编译过程 (10)
12 内核编译过程(3小时后) (11)
13 内核编译成功 (12)
14 安装新内核 (12)
15 新内核安装过程 (13)
16 比较两个内核 (14)
17 重新启动系统 (14)
18 登录新内核 (15)
19 新内核登录成功 (15)
20 查看新内核版本号号 (16)
二、编译过程中遇到的问题 (16)
1 错误VFS:Unable to mount root (16)
2错误Driver ‘mdio-gpio’ (18)
Practice2 (20)
一、内核选项翻译及选择理由 (20)
1. General setup 常规设置 (20)
二、裁剪过程 (21)
1.进入设置界面 (21)
2. General setup页设置 (22)
3. Enable the block layer页设置 (23)
4. Processor type and features页设置 (24)
5. Power Management and ACPI options页设置 (28)
6. Bus options页设置 (29)
7. Executable file formats页设置 (30)
8. Networking options页设置 (31)
9. Device Drivers 页设置 (34)
10. Firmware Drivers页设置 (37)
11. File systems页设置 (38)
12. Kernel hacking页设置 (40)
13 CryptographicAPI页设置 (41)