micropython oled中文_MicroPython+ESP8266：点亮OLED

效果图

接线示意图

主文件main.py

from machine import Pin, I2C

i2c = I2C(scl=Pin(5), sda=Pin(4))

from ssd1306 import SSD1306_I2C

oled = SSD1306_I2C(128, 64, i2c)

oled.fill(1)

oled.show()

oled.fill(0)

oled.show()

oled.pixel(0, 0, 1)

oled.show()

oled.pixel(127, 63, 1)

oled.show()

oled.text('Hello', 0, 0)

oled.text('World', 0, 10)

oled.show()

oled.invert(True)

oled.invert(False)

OLED显示库使用 ssd1306.py

# MicroPython SSD1306 OLED driver, I2C and SPI interfaces

from micropython import const

import framebuf

# register definitions

SET_CONTRAST = const(0x81)

SET_ENTIRE_ON = const(0xA4)

SET_NORM_INV = const(0xA6)

SET_DISP = const(0xAE)

SET_MEM_ADDR = const(0x20)

SET_COL_ADDR = const(0x21)

SET_PAGE_ADDR = const(0x22)

SET_DISP_START_LINE = const(0x40)

SET_SEG_REMAP = const(0xA0)

SET_MUX_RATIO = const(0xA8)

SET_COM_OUT_DIR = const(0xC0)

SET_DISP_OFFSET = const(0xD3)

SET_COM_PIN_CFG = const(0xDA)

SET_DISP_CLK_DIV = const(0xD5)

SET_PRECHARGE = const(0xD9)

SET_VCOM_DESEL = const(0xDB)

SET_CHARGE_PUMP = const(0x8D)

# Subclassing FrameBuffer provides support for graphics primitives

# http://docs.micropython.org/en/latest/pyboard/library/framebuf.html

class SSD1306(framebuf.FrameBuffer):

def __init__(self, width, height, external_vcc):

self.width = width

self.height = height

self.external_vcc = external_vcc

self.pages = self.height // 8

self.buffer = bytearray(self.pages * self.width)

super().__init__(self.buffer, self.width, self.height, framebuf.MONO_VLSB)

self.init_display()

def init_display(self):

for cmd in (

SET_DISP | 0x00, # off

# address setting

SET_MEM_ADDR,

0x00, # horizontal

# resolution and layout

SET_DISP_START_LINE | 0x00,

SET_SEG_REMAP | 0x01, # column addr 127 mapped to SEG0

SET_MUX_RATIO,

self.height - 1,

SET_COM_OUT_DIR | 0x08, # scan from COM[N] to COM0

SET_DISP_OFFSET,

0x00,

SET_COM_PIN_CFG,

0x02 if self.width > 2 * self.height else 0x12,

# timing and driving scheme

SET_DISP_CLK_DIV,

0x80,

SET_PRECHARGE,

0x22 if self.external_vcc else 0xF1,

SET_VCOM_DESEL,

0x30, # 0.83*Vcc

# display

SET_CONTRAST,

0xFF, # maximum

SET_ENTIRE_ON, # output follows RAM contents

SET_NORM_INV, # not inverted

# charge pump

SET_CHARGE_PUMP,

0x10 if self.external_vcc else 0x14,

SET_DISP | 0x01,

): # on

self.write_cmd(cmd)

self.fill(0)

self.show()

def poweroff(self):

self.write_cmd(SET_DISP | 0x00)

def poweron(self):

self.write_cmd(SET_DISP | 0x01)

def contrast(self, contrast):

self.write_cmd(SET_CONTRAST)

self.write_cmd(contrast)

def invert(self, invert):

self.write_cmd(SET_NORM_INV | (invert & 1))

def show(self):

x0 = 0

x1 = self.width - 1

if self.width == 64:

# displays with width of 64 pixels are shifted by 32

x0 += 32

x1 += 32

self.write_cmd(SET_COL_ADDR)

self.write_cmd(x0)

self.write_cmd(x1)

self.write_cmd(SET_PAGE_ADDR)

self.write_cmd(0)

self.write_cmd(self.pages - 1)

self.write_data(self.buffer)

class SSD1306_I2C(SSD1306):

def __init__(self, width, height, i2c, addr=0x3C, external_vcc=False):

self.i2c = i2c

self.addr = addr

self.temp = bytearray(2)

self.write_list = [b"\x40", None] # Co=0, D/C#=1

super().__init__(width, height, external_vcc)

def write_cmd(self, cmd):

self.temp[0] = 0x80 # Co=1, D/C#=0

self.temp[1] = cmd

self.i2c.writeto(self.addr, self.temp)

def write_data(self, buf):

self.write_list[1] = buf

self.i2c.writevto(self.addr, self.write_list)

class SSD1306_SPI(SSD1306):

def __init__(self, width, height, spi, dc, res, cs, external_vcc=False):

self.rate = 10 * 1024 * 1024

dc.init(dc.OUT, value=0)

res.init(res.OUT, value=0)

cs.init(cs.OUT, value=1)

self.spi = spi

self.dc = dc

self.res = res

self.cs = cs

import time

self.res(1)

time.sleep_ms(1)

self.res(0)

time.sleep_ms(10)

self.res(1)

super().__init__(width, height, external_vcc)

def write_cmd(self, cmd):

self.spi.init(baudrate=self.rate, polarity=0, phase=0)

self.cs(1)

self.dc(0)

self.cs(0)

self.spi.write(bytearray([cmd]))

self.cs(1)

def write_data(self, buf):

self.spi.init(baudrate=self.rate, polarity=0, phase=0)

self.cs(1)

self.dc(1)

self.cs(0)

self.spi.write(buf)

self.cs(1)

界面示意图