输出高电平程序c语言,51用c语言怎么编程检测US-100超声波测距模块echo/rx引脚输出高电平时间长度，，谁能给我个模板...

满意答案

lixsh518

2016.07.24

采纳率：46%    等级：9

已帮助：768人

#include

#define uchar unsigned char

#define uint unsigned int

unsigned char code smg[]={0xc0,0xf9,0xa4,0xb0,0x99,0x92,0x82,0xf8,0x80,0x90,0x88,0x83,0xc6,0xa1,0x86,0x8e,0x00};

sbit tr=P1^0;

sbit ec=P1^1;

uint distance,time,tl,th;

void delay_20us(void )

{

uchar a ;

for(a=0;a<100;a++);

}

void delay(uint a )

{

while(a--);

}

void display(void )

{

P2=0xff;

P2=0xfe;

P0=smg[distance/100];

delay(200);

P2=0xff;

P2=0xfd;

P0=smg[distance%100/10];

delay(200);

P2=0xff;

P2=0xfb;

P0=smg[distance%10];

delay(200);

}

void main(void )

{

uchar i;

TMOD=0X10;

while(1)

{

tr=1; //超声波输入端

delay_20us(); //延时20us

tr=0; //产生一个20us的脉冲

while(ec==0); //等待Echo回波引脚变高电平

TH1=0; //定时器1清零

TL1=0; //定时器1清零

TF1=0; //计数溢出标志

TR1=1; //启动定时器1

while(ec==1);

th=TH1;

tl=TL1;

TL1=0;

TH1=0;

TR1=0; //关闭定时器1

time=th*256+tl;

distance=time*0.017; //厘米 */

display()；

}

}追问： 谢谢

00分享举报