安装oracle10201,一个ORACLE10201 安装时候的小故障解决

Issue#3: After working around Issue#2 above, vipca will fail to run with the following error if the VIP IP’s are in a non-routable range [10.x.x.x, 172.(16-31).x.x or 192.168.x.x]:

# vipca

Error 0(Native: listNetInterfaces:[3])

[Error 0(Native: listNetInterfaces:[3])]

原因是这样的：

These releases of the Linux kernel fix an old bug in the Linux threading that Oracle worked around using LD_ASSUME_KERNEL settings in both vipca and srvctl, this workaround is no longer valid on OEL5 or RHEL5 or SLES10 hence the failures.

问题的解决方法：

To workaround issue#3 (vipca failing on non-routable VIP IP ranges, manually or during root.sh), if you still have the OUI window open, click OK and it will create the “oifcfg” information, then cluvfy will fail due to vipca not completed successfully, skip below in this note and run vipca manually then return to the installer and cluvfy will succeed. Otherwise you may configure the interfaces for RAC manually using the oifcfg command as root, like in the following example (from any node):

/bin # ./oifcfg setif -global eth0/192.168.1.0:public

/bin # ./oifcfg setif -global eth1/10.10.10.0:cluster_interconnect

/bin # ./oifcfg getif

eth0 192.168.1.0 global public

eth1 10.10.10.0 global cluster_interconnect

然后在手工运行vipca添加nodeapps resource即可。