计算机网络路由器配置 en,计算机网络路由器配置.doc

计算机网络路由器配置.doc

郑州轻工业学院

课程设计报告

设计名称： 计算机网络路由器配置

课程名称： 计算机网络

院(系)： 国际教育院系

专业班级： 互联网091班

姓 名： 白晨曦

学 号： 540912010101

日 期： 2011年4月18日 至 2011年4月19日

地 点：计算机与通信工程学院网络实验室

指导教师： 李建春

成 绩： 实验一：静态路由配置

实验目的

掌握路由表的概念

掌握网络号、静态路由、默认网关、静态路由概念

配置思科路由器静态路由

实验环境(Packet Tracer 5)

实验方法(具体步骤、命令及截图)

打开 Packet Tracer5;

依次拖动交换机图标和终端图标到主界面，如拓扑图

双击交换器图标，进入CLI界面，依次输入代码，进行

创建VLAN:

Switch>?

Exec commands:

<1-99> Session number to resume

connect Open a terminal connection

disconnect Disconnect an existing network connection

enable Turn on privileged commands

exit Exit from the EXEC

logout Exit from the EXEC

ping Send echo messages

resume Resume an active network connection

show Show running system information

telnet Open a telnet connection

terminal Set terminal line parameters

traceroute Trace route to destination

Switch>en

Switch#conf t

Enter configuration commands, one per line. End with CNTL/Z.

Switch(config)#hostname Leo

Leo(config)#vlan 10

Leo(config-vlan)#name English

Leo(config-vlan)#exit

Leo(config)#exit

%SYS-5-CONFIG_I: Configured from console by console

Leo#vlan database

% Warning: It is recommended to configure VLAN from config mode,

as VLAN database mode is being deprecated. Please consult user

documentation for configuring VTP/VLAN in config mode.

Leo(vlan)#vlan 20 name Physical

VLAN 20 added:

Name: Physical

Leo(vlan)#vlan 40 name Others

VLAN 40 added:

Name: Others

Leo(vlan)#exit

APPLY completed.

Exiting....

把端口划分给VLAN(基于端口的VLAN)

Leo#?

Exec commands:

<1-99> Session number to resume

clear Reset functions

clock Manage the system clock

configure Enter configuration mode

connect Open a terminal connection

copy Copy from one file to another

debug Debugging functions (see also 'undebug')

delete Delete a file

dir List files on a filesystem

disable