单片机液晶显示c语言程序,单片机驱动19264液晶显示汉字c程序

19264液晶是一种比12864大一点点的单色液晶，这里我给大家介绍一下用stc系列单片机驱动他显示汉字的原理

效果图

由于网页空间篇幅有限本文只列出了部分代码，完整版本请从 http://www.51hei.com/f/19264.rar 处下载

#include

#include

#define uchar unsigned char

#define uint unsigned int

uint ee;

uchar f;

sbit lcd_cs3=P1^0;//片选信号右 低有效

sbit lcd_cs2=P1^1;//片选信号中 低有效

sbit lcd_cs1=P1^2;//片选信号左 低有效

sbit lcd_e =P1^3;//使能信号

sbit lcd_rw =P1^4;//读写选择

sbit lcd_rs =P1^5;//数据命令选择端 H数据 L命令

sbit lcd_rst=P1^6;// 液晶复位引脚 低有效 低的话 就一直复位了

//P2八位数据线

uchar code cc[]={

/*---------------小----------------*/

0xFF,0xFF,0xFF,0xFF,0xBF,0xDF,0xEF,0xE7,0xF3,0xF9,0xFB,0xFF,0xFF,0xFF,0xFF,0xFF,

0xFE,0xFE,0xFE,0xFE,0xF6,0xF2,0xE6,0xEE,0xDE,0xBE,0x7E,0xFE,0xFE,0xFE,0xFA,0xFD,

/*---------------鹏----------------*/

0xEF,0xDF,0x83,0x9B,0xAB,0xAB,0xB3,0xBF,0x81,0xFD,0xFD,0x05,0xFD,0xEB,0xF7,0xFF,

0xFF,0x88,0xAA,0xAA,0x88,0xAA,0xAA,0xAA,0x88,0xAA,0xAA,0xAA,0xAA,0x46,0xEC,0xFF,

/*---------------工----------------*/

0xFF,0xFF,0xFF,0xF7,0xF7,0xF7,0xF7,0x07,0xFB,0xFB,0xFB,0xFB,0xFF,0xFF,0xFF,0xFF,

0xFF,0xEF,0xEF,0xEF,0xEF,0xEF,0xEF,0xF0,0xF7,0xF7,0xF7,0xF7,0xF7,0xF7,0xFF,0xFF,

/*---------------作----------------*/

0x7F,0xBF,0xDF,0x07,0xF8,0xBF,0xCF,0xE3,0x0C,0x6F,0x6F,0xB7,0xB7,0xF7,0xFF,0xFF,

0xFF,0xFF,0xFF,0x80,0xFF,0xFF,0xFF,0xFF,0x80,0xFB,0xFB,0xFD,0xFD,0xFD,0xFF,0xFF,

/*---------------室----------------*/

0xFF,0xFF,0xE7,0xD7,0x57,0x97,0xD6,0xD9,0x6B,0x6B,0x2B,0x73,0xFB,0xFF,0xFF,0xFF,

0xFF,0xBF,0xBF,0xB6,0xB6,0xB6,0xB6,0xC0,0xDB,0xDB,0xDB,0xDE,0xDF,0xFF,0xFF,0xFF,