linux下自动化配置telnet,Linux下三种方式实现自动Telnet

转自： 复合肥自垦地

一、Shell实现，文件名：autotelnet.sh，代码如下：

(sleep

1;echo "root";sleep 1;echo "123456";sleep 1;echo "en";sleep 1;echo

"1qazse4";sleep 1;echo "conf t";sleep 1;echo "int fa0/1";sleep 1;echo

"switchport mode multi";sleep 1;echo "end";sleep 1;echo "exit") |

telnet 10.32.17.10

二、Expect来实现，文件名：autotelnet.exp，代码如下：

#!/usr/bin/expect

set timeout 100

set TERM xterm

set SERVER "10.32.17.10"

set USER "root"

set PASSWD "123456"

spawn telnet

expect "telnet> "

send "open $SERVER"

expect "Username:"

send "$USER"

expect "Password:"

send "$PASSWD"

expect "longjiang-zero>"

send "en"

expect "Password:"

send "$PASSWD"

expect "longjiang-zero#"

send "conf t"

expect "longjiang-zero(config)#"

send "int fa0/1"

expect "longjiang-zero(config-if)#"

send "switchport mode multi"

expect "longjiang-zero(config-if)#"

send "end"

expect "longjiang-zero#"

send "exit"

interact

三、Python来实现，文件名：autotelnet.py，代码如下：

#!/usr/bin/python

import telnetlib

host = '10.32.17.10'

user = 'root'

password = '123456'

commands = ['en',password,'conf t','int fa0/1','switchport mode multi','end']

tn = telnetlib.Telnet(host)

tn.read_until("Username:")

tn.write(user + "

")

tn.read_until("Password:")

tn.write(password + "

")

for command in commands:

tn.write(command+'

')

tn.write("exit

")

print tn.read_all()

print 'Finish!'

具体环境不做介绍。