怎么下载oracle+10g,oracle+10g_linux下安装步骤文件

oracle+10g_linux下安装步骤文件sdgsdfgbscbxdfbndxfndfgndfgndfgndfgndfgndfgnfgnsfgnsfdgndfgnsfgnsfgnsdfnsgnsdfnsdfnsdfnsdfnsdfbnsdfnsdfnhkjtyulghj,ghj.,giltyi.lgkj.,gjtyuetyjtyjertjtyktyktyktykuykyuliuloi;/io/;yio;yk.ghjltyultyiluuiibv ncvhkjyu8ot8;jhkmdtyik76ikrtyjsrtjyjtykyulo; vbnmvbj tyum67mrt7wnn7imddrn57m8m ern6m78mmm68m;,bjrtyiryuhmdftjdrtuertjdfghsdftydrtjsdfhsdfhsdfhkyuluiltylutyultyultyuly

1.以root用户登录系统，从OTN下载Oracle 10g，解压

http://doc.xuehai.net/software/products/database/oracle10g/index.html

--------------------------------------------------------------------------------

2. 检查硬件需求

1)至少1G内存

内存大小 Swap分区大小

1G-2G RAM的1.5倍

2G-8G 与RAM相等

大于8G RAM的0.75倍

相关命令：

#grep MemTotal /proc/meminfo

#grep SwapTotal /proc/meminfo

如何增加swap分区?

# mkdir /temp

[root@pdc newfolder]# dd if=/dev/zero of=/temp/swap bs=1k count=1024000

1024000+0 records in

1024000+0 records out

1048576000 bytes (1.0 GB) copied, 10.2443 seconds, 102 MB/s

# ll /temp/swap

-rw-r--r-- 1 root root 1048576000 May 22 17:27 /temp/swap

# mkswap /temp/swap

Setting up swapspace version 1, size = 1048571 kB

# swapon /temp/swap

2)/tmp至少有400M剩余空间

相关命令： #df -hk /tmp

3)按照安装类型的不同，Oracle最后大约占用1.5G-3.5G的硬盘空间

--------------------------------------------------------------------------------

3.软件需求

1)操作系统：redhat-3, SuSE-9, redhat-4, UnitedLinux-1.0, asianux-1 or asianux-2

如果你使用的不是上面列出的操作系统，安装时可以能会得到错误：

Checking installer requirements...

Checking operating system version: must be redhat-3, SuSE-9, redhat-4, UnitedLinux-1.0, asianux-1 or asianux-2

Failed <<<<

Exiting Oracle Universal Installer, log for this session can be found at...........

这种情况下，你需要修改/etc/redhat-release为：redhat-4