计算机网络实验三交换机基本配置实验报告
实验报告3
班级:07东方信息 姓名: 学号:
实验时间:4-26 机房:9#205 组号:7 机号:
一、实验题目
实验三 交换机基本配置
二、实验设备
CISCO交换机,网线,CONSOLE线,PC机(带COM口)
三、实验内容
学习基本的CISCO交换机配置
四、原理
交换技术是一个具有简化、低价、高性能和高端口密集特点的交换产品,体现了桥接技术的复杂交换技术在OSI参考模型的第二层。与桥接器一样,交换机按每一个包中的MAC地址相对简单地决策信息转发。而这种转发决策一般不考虑包中隐藏的更深的其他信息。与桥接器不同的是交换机转发延迟很小,接近单个局域网性能,远远超过了普通桥接互联网络之间的转发性能。
五、实际步骤
建立超级连接
建立CONSOLE连接
进入特权命令状态
进入全局状态模式
设置交换机的名字为SWITCH_2
进入接口设置状态,设置接口参数
进入接口设置状态
设置交换机的duplex方式
退出配置状态,在特权命令状态,验证端口工作状态
检查4台机的通信状态
设置switch2为端口VTP的server
检查连通状态
实验数据:
FastEthernet0/22 unassigned YES unset down down
FastEthernet0/23 unassigned YES unset down down
FastEthernet0/24 unassigned YES unset up up
GigabitEthernet0/1 unassigned YES unset down down
GigabitEthernet0/2 unassigned YES unset down down
Configuring global parameters:
Enter host name [Switch]:
The enable secret is a password used to protect access to
privileged EXEC and configuration modes. This password, after
entered, becomes encrypted in the configuration.
Enter enable secret:
% No defaulting allowed
Enter enable secret:
% No defaulting allowed
Enter enable secret:
% No defaulting allowed
Enter enable secret: switch>
The enable password is used when you do not specify an
enable secret password, with some older software versions, and
some boot images.
Enter enable password: cisco
The virtual terminal password is used to protect
access to the router over a network interface.
Enter virtual terminal password: cisco
Configure SNMP Network Management? [no]: n
Configuring interface parameters:
Do you want to configure Vlan1 interface? [yes]: n
Do you want to configure FastEthernet0/1 interface? [yes]: n
Do you want to configure FastEthernet0/2 interface? [yes]: n
Do you want to configure FastEthernet0/3 interface? [yes]: n
Do you want to configure FastEthernet0/4 interface? [yes]: n
Do yo