linux 内核 问题,Linux 内核的一个问题

是virtio 驱动，但是没有启动

virtio-mmio virtio-mmio.0: Failed to enable 64-bit or 32-bit DMA. Trying to continue, but this might not work.

....

[ 1.047924] md: ... autorun DONE.

[ 1.050424] VFS: Cannot open root device "vda" or unknown-block(0,0): error -6

[ 1.053462] Please append a correct "root=" boot option; here are the available partitions:

[ 1.056923] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0)

[ 1.060340] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.16.18 #3

[ 1.061985] Call Trace:

[ 1.062631] dump_stack+0x61/0x7d

[ 1.063488] panic+0xe7/0x247

[ 1.064242] mount_block_root+0x26c/0x2d0

[ 1.065350] ? set_debug_rodata+0x17/0x17

[ 1.066324] mount_root+0x6a/0x6d

[ 1.067002] prepare_namespace+0x139/0x171

[ 1.067834] kernel_init_freeable+0x22d/0x255

[ 1.068726] ? rest_init+0xb0/0xb0

[ 1.069427] kernel_init+0xe/0xff

[ 1.070110] ret_from_fork+0x35/0x40

[ 1.071013] Kernel Offset: disabled

[ 1.071699] ---[ end Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0)

I have compiled a new linux kernel with CONFIG_VIRTIO_BLK=y. But it doesn't boot and kernel panics. To kernel command line i tried passing root=/dev/vda and root=/dev/vda1 but same kernel panic comes every time. VIRTIO_NET was working fine when VIRTIO_BLK was not enabled and VM booted up fine. But with virtio-blk i see the below kernel panic. Can someone please suggest what could be going wrong?

VFS: Cannot open root device "vda" or unknown-block(253,0)^M Please append a correct "root=" boot option; here are the available partitions:^M fd00 8388608 vda driver: virtio_blk^M fd01 7340032 vda1 00000000-0000-0000-0000-000000000000^M

fd02 512000 vda2 00000000-0000-0000-0000-000000000000^M fd03 535552 vda3 00000000-0000-0000-0000-000000000000^M Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(253,0)^M

Regards, Saurabh -------------- next part -------------- An HTML attachment was scrubbed...