华为3g网卡 linux,华为 3G上网卡 E1750 在DM6446上移植的有关问题

华为 3G上网卡 E1750 在DM6446上移植的有关问题

华为 3G上网卡 E1750 在DM6446上移植的有关问题

日期：2014-05-16　 浏览次数：20322 次

华为 3G上网卡 E1750 在DM6446上移植的问题

root@192.168.1.2:/opt/3g# lsusb

Bus 001 Device 002: ID 12d1:1446

Bus 001 Device 001: ID 04d6:0000 Mentor Graphics

root@192.168.1.2:/opt/3g# source init.sh

root@192.168.1.2:/opt/3g# ./usb_modeswitch

Looking for target devices ...

No devices in target mode or class found

Looking for default devices ...

Found devices in default mode or class (1)

Accessing device 033 on bus 001 ...

Using endpoints 0x01 (out) and 0x81 (in)

Inquiring device details; driver will be detached ...

Looking for active driver ...

OK, driver found ("usb-storage")

OK, driver "usb-storage" detached

SCSI inquiry data (for identification)

-------------------------

Vendor String: HUAWEI

Model String: Mass Storage

Revision String: 2.31

-------------------------

USB description data (for identification)

-------------------------

Manuusb 1-1: usbfs: process 1168 (usb_modeswitch) did not claim interface 0 before use

facturer: HUAWEIusb 1-1: USB disconnect, address 2

Technology

Product: HUAWEI Mobile

Serial No.: not provided

-------------------------

Setting up communication with interface 0 ...

Using endpoint 0x01 for message sending ...

Trying to send message 1 to endpoint 0x01 ...

OK, message successfully sent

Device is gone, skipping any further commands

-> Run lsusb to note any changes. Bye.

root@192.168.1.2:/opt/3g# usb 1-1: new high speed USB device using musb_hdrc and address 3

pl2303 1-1:1.0: PL-2303 converter detected

usb 1-1: PL-2303 converter now attached to ttyUSB0

pl2303 1-1:1.1: PL-2303 converter detected

usb 1-1: PL-2303 converter now attached to ttyUSB1

pl2303 1-1:1.2: PL-2303 converter detected

usb 1-1: PL-2303 converter now attached to ttyUSB2

scsi2 : SCSI emulation for USB Mass Storage devices

scsi3 : SCSI emulation for USB Mass Storage devices

Vendor: HUAWEI Model: Mass Storage Rev: 2.31

Type: CD-ROM ANSI SCSI revision: 02

Vendor: HUAWEI Model: SD Storage Rev: 2.31

Type: Direct-Access ANSI SCSI revision: 02

Attached scsi removable disk sda at scsi3, channel 0, id 0, lun 0

root@192.168.1.2:/opt/3g# echo ATZ>/dev/ttyUSB0

usb 1-1: bash timed out on ep0out

root@192.168.1.2:/opt/3g# cat /dev/ttyUSB0

usb 1-1: cat timed out on ep0out

OK

root@192.168.1.2:/opt/3g# pppd call wcdma &

[1] 1479

root@192.168.1.2:/opt/3g# usb 1-1: pppd timed out on ep0out

usb 1-1: pppd timed out on ep0out

abort on (NO CARRIER)

abort on (ERROR)

abort on (NO DIALTONE)

abort on (BUSY)

abort on (NO ANSWER)

send (^MAT^M)

expect (OK)

AT^M^M

OK

-- got it

send (^MATZ^M)

expect (OK)

^M

ATZ^M^M

OK

-- got it

send (^MAT+CGDCONT=1,"IP","3gnet",,0,0^M)

expect (OK)

^M

AT+CGDCONT=1,"IP","3gnet",,0,0^M^M

OK

-- got it

send (ATDT*99#^M)

expect (CONNECT)

^M

ATDT*99#^M^M

CONNECT

-- got it

send (\d)

Serial connection established.

usb 1-1: pppd timed out on ep0out

Using interface ppp0

Connect: ppp0 /dev/ttyUSB0

PAP authentication succeeded

Could not determine remote IP address: defaulting to 10.64.64.64

not replacing default route to eth0 [192.168.1.3]

Cannot determine ethernet address for proxy ARP

local IP address 172.24.192.54

remote IP address 10.64.64.6

免责声明： 本文仅代表作者个人观点，与爱易网无关。其原创性以及文中陈述文字和内容未经本站证实，对本文以及其中全部或者部分内容、文字的真实性、完整性、及时性本站不作任何保证或承诺，请读者仅作参考，并请自行核实相关内容。