INCH-POUND
MIL-DTL-83528C
5 January 2001
SUPERSEDING
MIL-G-83528B
10 July 1992
DETAIL SPECIFICATION
GASKETlNG MATERIAL, CONDUCTIVE, SHIELDING GASKET,
ELECTRONIC, ELASTOMER, EMI/RFI
GENERAL SPECIFICATION FOR
This specification is approved for use by all Departments
and Agencies of the Department of Defense.
1. SCOPE
1.1 Scope. This specification establishes the general requirements for electrically conductive elastomeric
shielding gaskets. These gaskets are intended for use in electromagnetic interference/radio frequency interference
suppression applications.
1.2 Classification.
1.2.1 Part or Identifying Number (PIN). The PIN is to be as shown in the following example:
M 83528/ 001 C 005
Military General Specification Material Dash
designator specification sheet number type number
number (3 digits) (see ) (see 3.1)
Material type.
A Silver-plated, copper-filled silicone capable of 110 dB of plane wave shielding