2016服务器系统驱动,windows sever2016驱动大家是怎么装的啊

顯卡的話，請參考底下 "改注册表中Acceleration.Level有什么卵用吗？" 這篇，將注册表中 Acceleration.Level改為0後重開機，再依程序安裝驅動。

這不是有無卵用的問題，而是在 WinServer(e.g. 2008, 2012 ,2016等)系統中必得先如此做始能正常安裝...Why?我也不知，這其實是多年前國外網站某位先進提供的，原內容我有抄錄；如下(以AMD/CCC驅動為例的)：

The CCC is not supported by the driver version of your enabled graphics adapter:

1. Open regedit (by typing in regedit in the search field in the start menu)

2. Go to the following key:

HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Control\Video

3. within all folders LIKE {6055FC4B-81E9-428C-82AC-28EB17CA102F} ( yours might be slightly different )

open the 0000 folder until you see all Nvidia profiles ( keys like "_3DMark03.exe:D3DOGL_49119164", there’s a lot of them).

Once you've found this folder do not keep on searching.

4. on the right side, scroll down until you can see the following key : Acceleration.Level

5. Change its value from 4 to 0. (if there is any other value than 4, still change it to 0 )

6. Close regedit, restart your computer

http://bbs.pcbeta.com/viewthread-1720555-1-1.html

"改注册表中Acceleration.Level有什么卵用吗？"