android 6.0音频分析,[RK3288][Android6.0] 音频调试方法小结【转】

Platform: ROCKCHIP

OS: Android 6.0

Kernel: 3.10.92

以rt5631为例，后续遇到再增加．

使用tinyalsa工具确定播放音问题是否在驱动层

[email protected]:/data # tinycap  test.wav

Capturing sample: 2 ch, 44100 hz, 16 bit

^CCaptured 167936 frames

[email protected]:/data # tinyplay test.wav

Playing sample: 2 ch, 44100 hz, 16 bit

查看codec寄存器和正常的对比：

[email protected]:/data # cat /sys/kernel/debug/asoc/RK_RT5631/rt5631.2-001a/codec_reg                         <

00: 0000

01: 0000

//省略...

查看i2s寄存器和正常的对比：

[email protected]:/data # cat /sys/kernel/debug/regmap/ff890000.rockchip-i2s/registers

00: 0000000f

04: 00000000

08: 00033f3f

0c: 00000000

10: 000f0010

14: 00000000

18: 00000000

1c: 00000000

20: 00000000

28: 00000000

查看播放或者录音时的sw/hw parameters:(注意，要在工作的时候才有效)

[email protected]:/proc/asound/card0/pcm0p/sub0 # cat sw_params

tstamp_mode: ENABLE

period_step: 1

avail_min: 1

start_threshold: 1536

stop_threshold: 3072

silence_threshold: 0

silence_size: 0

boundary: 1610612736

[email protected]:/proc/asound/card0/pcm0p/sub0 # cat hw_params

access: RW_INTERLEAVED

format: S16_LE

subformat: STD

channels: 2

rate: 44100 (44100/1)

period_size: 512

buffer_size: 3072

硬件部分用示波器量一下I2S是否有信号

原文：http://www.cnblogs.com/zzb-Dream-90Time/p/7779034.html