1. 添加磁盘,查看磁盘状况
# fdisk -l
Disk /dev/sda: 10.7 GB, 10737418240 bytes
255 heads, 63 sectors/track, 1305 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/sda1 * 151 1305 9277537+ 83 Linux
/dev/sda2 1 150 1204843+ 82 Linux swap
Partition table entries are not in disk order
Disk /dev/sdb: 5368 MB, 5368709120 bytes //新硬盘还没有分区
255 heads, 63 sectors/track, 652 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
从查询结果看出,多了一个/dev/sdb的盘
2. 用fdisk 对/dev/sdb 进行分区
# fdisk /dev/sdb
Command (m for help): n //新建一个分区
Command action
e extended
p primary partition (1-4)
p //创建一个主分区
Partition number (1-4): 1//分区编号为1
First cylinder (1-652, default 1): //默认回车,使用默认值
Using default value 1
Last cylinder or +size or +sizeM or +sizeK (1-652, default 652): //默认回车,使用默认值
Using default value 652
Command (m for help): w //保存推出
The partition table has been altered!
Calling ioctl() to re-read partition table.
Syncing disks.
再次查看分区情况,多出来一个/dev/sdb1 的区,这个1是我们在前面指定的,如果我们指定2,就变成 sdb2了。
# fdisk -l
Disk /dev/sda: 10.7 GB, 10737418240 bytes
255 heads, 63 sectors/track, 1305 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/sda1 * 151 1305 9277537+ 83 Linux
/dev/sda2 1 150 1204843+ 82 Linux swap
Partition table entries are not in disk order
Disk /dev/sdb: 5368 MB, 5368709120 bytes
255 heads, 63 sectors/track, 652 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/sdb1 1 652 5237158+ 83 Linux //已经分完了
3. 格式化 /dev/sdb1 分区
#mkfs -t ext3 /dev/sdb1
mke2fs 1.35 (28-Feb-2004)
Filesystem label=
OS type: Linux
Block size=4096 (log=2)
Fragment size=4096 (log=2)
655360 inodes, 1309289 blocks
65464 blocks (5.00%) reserved for the super user
First data block=0
Maximum filesystem blocks=1342177280
40 block groups
32768 blocks per group, 32768 fragments per group
16384 inodes per group
Superblock backups stored on blocks:
32768, 98304, 163840, 229376, 294912, 819200, 884736
Writing inode tables: done
Creating journal (8192 blocks): done
Writing superblocks and filesystem accounting information: done
This filesystem will be automatically checked every 30 mounts or
180 days, whichever comes first. Use tune2fs -c or -i to override.
4. 创建目录 并将 /dev/sdb1 挂载到该目录下
# mkdir /u01
# mount /dev/sdb1 /u01
5. 验证挂载是否成功
# df -k或 df -h
Filesystem 1K-blocks Used Available Use% Mounted on
/dev/sda1 9131772 7066884 1601012 82% /
none 454256 0 454256 0% /dev/shm
/dev/sdb1 5154852 43040 4849956 1% /u01
6. 设置开机自动挂载
# vi /etc/fstab
# This file is edited by fstab-sync - see 'man fstab-sync' for details
LABEL=/ / ext3 defaults 1 1
none /dev/pts devpts gid=5,mode=620 0 0
none /dev/shm tmpfs defaults 0 0
none /proc proc defaults 0 0
none /sys sysfs defaults 0 0
LABEL=SWAP-sda2 swap swap defaults 0 0
/dev/sdb1 /u01 ext3 defaults 0 0
保存退出 重启就自动挂载。
继续阅读:Linux
原创文章请注明转载自技术小站本文地址:http://www.i5i6.net/post/91.html,标题:linux分区格式化创建目录挂载