在服务器删除的文件 恢复出厂设置密码,路由器的恢复出厂设置、修改特权密码、备份配置文件和升级操作系统实际操作...

1、恢复厂家设置在路由器特权模式输入命令如下:Router#erRouter#erasestRouter#erasestartup-configErasingthenvramfilesystemwillremoveallconfigurationfiles

1、恢复厂家设置

在路由器特权模式输入命令如下:

Router#er

Router#erase st

Router#erase startup-config

Erasing the nvram filesystem will remove all configuration files! Continue? [confirm]

[OK]

Erase of nvram: complete

%SYS-7-NV_BLOCK_INIT: Initialized the geometry of nvram

Router#reload

Proceed with reload? [confirm]

%SYS-5-RELOAD: Reload requested by console. Reload Reason: Reload Command.

System Bootstrap, Version 12.1(3r)T2, RELEASE SOFTWARE (fc1)

Copyright (c) 2000 by cisco Systems, Inc.

Cisco 2621 (MPC860) processor (revision 0x200) with 253952K/8192K bytes of memory

Self decompressing the image :

########################################################################## [OK]

Restricted Rights Legend

Use, duplication, or disclosure by the Government is

subject to restrictions as set forth in subparagraph

(c) of the Commercial Computer Software - Restricted

Rights clause at FAR sec. 52.227-19 and subparagraph

(c) (1) (ii) of the Rights in Technical Data and Computer

Software clause at DFARS sec. 252.227-7013.

cisco Systems, Inc.

170 West Tasman Drive

San Jose, California 95134-1706

Cisco IOS Software, 2600 Software (C2600-ADVIPSERVICESK9-M), Version 12.4(15)T1, RELEASE SOFTWARE (fc2)

Technical Support:

Copyright (c) 1986-2007 by Cisco Systems, Inc.

Compiled Wed 18-Jul-07 06:21 by pt_rel_team

Image text-base: 0x60080608, data-base: 0x6270CD50

This product contains cryptographic features and is subject to United

States and local country laws governing import, export, transfer and

use. Delivery of Cisco cryptographic products does not imply

third-party authority to import, export, distribute or use encryption.

Importers, exporters, distributors and users are responsible for

compliance with U.S. and local country laws. By using this product you

agree to comply with applicable laws and regulations. If you are unable

to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at:

If you require further assistance please contact us by sending email to

export@cisco.com.

Cisco 2621 (MPC860) processor (revision 0x200) with 253952K/8192K bytes of memory

Processor board ID JAD05190MTZ (4292891495)

M860 processor: part number 0, mask 49

2 FastEthernet/IEEE 802.3 interface(s)

32K bytes of non-volatile configuration memory.

16384K bytes of processor board System flash (Read/Write)

Cisco IOS Software, 2600 Software (C2600-ADVIPSERVICESK9-M), Version 12.4(15)T1, RELEASE SOFTWARE (fc2)

Technical Support:

Copyright (c) 1986-2007 by Cisco Systems, Inc.

Compiled Wed 18-Jul-07 06:21 by pt_rel_team

2、修改特权密码

1)首先在PT模拟器上建一个路由器,设置一个密码。

Router>

Router>en

Router#config

Configuring from terminal, memory, or network [terminal]?

Enter configuration commands, one per line.  End with CNTL/Z.

Router(config)#

Router(config)#ena

Router(config)#enable p

Router(config)#enable password 123456

Router(config)#exit

Router#

%SYS-5-CONFIG_I: Configured from console by console

Router#write m

Router#write memory

Building configuration...

[OK]

Router#

2)在重设密码之前要重新启动路由器,在启动没完成之前按ctrl+c键进入rommon模式,然后输入以下命令,复制原文件到空白系统:

202910I95_0.jpg

3)重新设置密码,,输入如下命令:

202U94518_1.jpg

4)重新启动,再次进入rommon模式,进入正常模式,重新启动后需输入新密码。

202U94518_0.jpg

202UM543_1.jpg

3、备份配置文件

1)在PT模拟器上连接一个服务器和路由器,如下图所示。

202UM543_0.jpg

2)给服务器配一个地址。

202U51554_1.jpg

3)在路由器上输入以下命令。

  • 0
    点赞
  • 0
    收藏
    觉得还不错? 一键收藏
  • 0
    评论
评论
添加红包

请填写红包祝福语或标题

红包个数最小为10个

红包金额最低5元

当前余额3.43前往充值 >
需支付:10.00
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值