micropython应用触摸屏_尝鲜MicroPython，写一个GT911触摸屏的demo

最近想测试一下买的触摸屏是否可以正常使用，正巧从箱底翻出了吃灰多年的pyboard(其实是使用STM32F407的国产版，不过没区别啦)，配合VSCode + Pymakr，很容易就驱动起来了。

贴个测试图和代码：

import struct

import time

from pyb import Pin, ExtInt, Switch

from machine import I2C

from micropython import schedule

import micropython

micropython.alloc_emergency_exception_buf(1000)

class GT911:

def __init__(self, i2c, rst_label, int_label):

self.i2c = i2c

self.rst_pin = Pin(rst_label, Pin.OUT_PP)

self.int_pin = Pin(int_label, Pin.OUT_PP)

# Assert reset

self.rst_pin.low()

self.int_pin.low()

time.sleep_ms(10)

# Deassert reset

self.rst_pin.high()

# Wait until reset done

time.sleep_ms(5)

# Release INT pin for interrupt

self.int_pin = Pin(int_label, Pin.PULL_UP)

self.gt911_addr = 0x5D

def read_reg(self, reg_addr, nbytes):

return self.i2c.readfrom_mem(self.gt911_addr, reg_addr, nbytes, addrsize = 16)

def write_reg(self, reg_addr, data):

self.i2c.writeto_mem(self.gt911_addr, reg_addr, data, addrsize = 16)

def get_touch_point(self, id):

info = self.i2c.readfrom_mem(self.gt911_addr, 0x8148 + id * 0x8, 0x8, addrsize = 16)

return tuple([struct.unpack('

def register_callback(self, callback):

self.extint = ExtInt(self.int_pin, ExtInt.IRQ_FALLING, Pin.PULL_UP, callback)

gt911 = GT911(I2C(1, freq = 100000), 'X12', 'X11')

def gt911_isr(_):

# Get status register

sta_reg = gt911.read_reg(0x814E, 1)[0]

if sta_reg & 0x80 == 0:

return

# Get number of touch points

npoints = sta_reg & 0xF

# Display touch points

print('\r', end = '')

for id in range(npoints):

info = gt911.get_touch_point(id + 1)

print('(%4d, %3d) ' % (info[0], info[1]), end = '')

# Fill blank to flush display

for id in range(5 - npoints):

print(' ', end = '')

# Clear interrupt

gt911.write_reg(0x814E, bytearray([0]))

print('Press USR button to stop')

# Attach ISR

gt911.register_callback(lambda e: schedule(gt911_isr, e))

while Switch().value() == False:

pass

# Detach ISR

gt911.register_callback(None)